Amintacce da kwanciyar hankali a karkashin kafa tare da SPC
Bayani:
Abu:Farashin TYM506
Kauri:4.0mm ~ 8.0mm
Saka Layer:0.2mm ~ 0.7mm
Ƙarƙashin ƙasa(Na zaɓi):EVA / IXPE, 1.0mm ~ 2.0mm
Girman:12" X 24"/ 12" X 12"/ Keɓancewa
A matsayin sigar haɓakar shimfidar shimfidar LVT, shimfidar bene na SPC ya zama sananne sosai a kasuwannin shimfidar ƙasa, ba kawai don yanayin hana ruwa da ba a iya kwatanta shi ba, har ma saboda fitattun sifofinsa na karko.Abu ne mai sauƙi don kiyayewa, Eco-friendly, super-ƙarfin tsallake-tsalle, juriya na sinadarai tare da launuka masu yawa da iri.Babu shakka yanzu ana amfani da shi sosai a wurare da yawa ya zama ɗaya daga cikin benaye mafi zafi.
Ɗaya daga cikin abubuwan sihiri na shimfidar bene na SPC ga mabukacinmu shine, ko kai mai son kallon dutse ne ko kuma fi son kamannin itace, koyaushe zaka iya samun tsarin da kuka fi so a cikin shimfidar bene na SPC, ko ma kai babban mai son dutse ne- duba tayal, amma kuna mamakin dumi da kwanciyar hankali ƙarƙashin ƙafa, shimfidar bene na SPC na iya gamsar da ku a lokaci ɗaya.Zaɓi SPC plank a matsayin bene na gidan ku, sararin ku, ya zama kyakkyawan ra'ayi a gare ku, domin, abu ɗaya, yana da sauƙi a sami wani sanannen tsari wanda kuke so mafi yawan, ba za a iyakance shi ba lokacin da kuke so. ya zo yin tunani game da dukan salon dakin ku, tare da dubban shahararrun alamu da ake da su, bai kamata ya kasance da wahala a gare ku ba don gano wanda ya dace da ra'ayin ku, har ma da ƙirar sararin ku na musamman.Tare da fasalinsa na yau da kullun a cikin ƙafar ƙafa, yana ba ku aminci duk da haka taushi da jin daɗi a ƙarƙashin ƙafa, ba za ku ji sanyi da wahala ba koda kuwa shimfidar bene da kuke fuskanta shine kyan gani na dutse.SPC dabe, ba kawai yana ba ku aminci da kwanciyar hankali a ƙarƙashin ƙafa ba, har ma yana gamsar da ku ta hanyoyi da yawa, kamar fitattunsa da ɗimbin kallon da zaku iya zaɓa.
| Ƙayyadaddun bayanai | |
| Surface Texture | Itace Texture |
| Gabaɗaya Kauri | 4mm ku |
| Ƙarƙashin ƙasa (Na zaɓi) | IXPE/EVA(1mm/1.5mm) |
| Saka Layer | 0.3mm ku.(12 Mil.) |
| Nisa | 12" (305mm.) |
| Tsawon | 24" (610mm) |
| Gama | Rufin UV |
| Danna |  |
| Aikace-aikace | Kasuwanci & Gidan zama |
| SPC RIGID-CORE PLANK TECHNICAL DATA | ||
| Bayanin Fasaha | Hanyar Gwaji | Sakamako |
| Girma | EN427 | Wuce |
| Kauri a duka | EN428 | Wuce |
| Kauri na lalacewa yadudduka | EN429 | Wuce |
| Girman Kwanciyar hankali | IOS 23999: 2018 & ASTM F2199-18 | Jagoran Masana'antu ≤0.02% (82oC @ 6hrs) |
| Gaba ɗaya Jagoran Kera ≤0.03% (82oC @ 6hrs) | ||
| Curling (mm) | IOS 23999: 2018 & ASTM F2199-18 | Darajar 0.16mm(82oC @ 6hrs) |
| Ƙarfin Kwasfa (N/25mm) | ASTM D903-98 (2017) | Hanyar Masana'antu 62 (Matsakaici) |
| Tsallake Hanyar Kera 63 (Matsakaici) | ||
| Load a tsaye | Saukewa: ASTM F970-17 | Ragowar Shiga:0.01mm |
| Ragowar Shiga | Saukewa: ASTM F1914-17 | Wuce |
| Resistance Scratch | ISO 1518-1: 2011 | Babu shiga cikin shafi a nauyin 20N |
| Ƙarfin Kulle (kN/m) | ISO 24334: 2014 | Jagoran Masana'antu 4.9 kN/m |
| Ko'ina Jagoran Masana'antu 3.1 kN/m | ||
| Saurin Launi zuwa Haske | ISO 4892-3: 2016 Zagayowar 1 & ISO105–A05:1993/Kor.2:2005& ASTM D2244-16 | ≥ 6 |
| Martani ga wuta | TS EN 14041: 2018 Sashe na 4.1 & EN 13501-1: 2018 | Bfl-S1 |
| ASTM E648-17A | Darasi na 1 | |
| ASTM E84-18b | Darasi A | |
| Fitowar VOC | TS EN 14041: 2018 | ND - Shiga |
| ROHS/Heavy Metal | EN 71-3:2013+A3:2018 | ND - Shiga |
| Isa | A'a 1907/2006 GASKIYA | ND - Shiga |
| Formaldehyde watsi | TS EN 14041: 2018 | Darasi: E1 |
| Gwajin Phthalate | TS EN 14041: 2018 | ND - Shiga |
| PCP | TS EN 14041: 2018 | ND - Shiga |
| Hijira na Wasu Abubuwa | EN 71 – 3:2013 | ND - Shiga |
| Bayanin tattarawa (4.0mm) | |
| PC/ctn | 12 |
| Nauyi(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Nauyi(KG)/GW | 24500 |
