Classic Slate Surface Stone SPC Vinyl Flooring
Kufotokozera:
Kanthu:986-06s
Makulidwe:4.0mm ~ 8.0mm
Valani Layer:0.2mm ~ 0.7mm
pansi (Zosankha):EVA / IXPE, 1.0mm ~ 2.0mm
Kukula:12" X 24"/ 12" X 12"/ Kusintha mwamakonda
TopJoy SPC vinyl pansi sikhala ndi matabwa okha komanso ali ndi mwala, nsangalabwi, kapeti mapatani kusankha kwanu.
Ndipo pali mitundu yosiyanasiyana ya malo a SPC vinilu pansi.The classic slate surface is the general for stone pattern.
Zikuwoneka komanso zimamveka ngati mwala weniweni komanso zabwino kugwiritsa ntchito mu chipinda chochapira, khitchini ndi zina zotero.
2020 mtundu watsopano wotchuka kwambiri wa SPC vinyl pansi, wosanjikiza wosankha, wosasunthika wa UV kapena wosanjikiza.
Stone SPC vinilu yazokonza pansi kukula wamba ndi 12inch * 24inch.Tili ndi mankhwala ambiri apamtunda ogwirizana ndi mapangidwewo.
Monga kristalo, kalipentala wopaka pamanja, EIR, mochedwa mochedwa, mawonekedwe a granite ndi zina.
TopJoy mwala wa SPC pansi ndi wopanda madzi-olimba kwambiri kuposa matabwa olimba komanso pansi.
Ndipo pansi pa SPC pamakhala bata ndi kutentha pansi papansi, kuonetsetsa kuti palibe scuffs, zokala kapena madontho kuchokera kwa anthu kapena ziweto.
Pansi pa SPC imayika mosavuta komanso mwachangu popanda zomatira kuti musunge nthawi ndi ndalama zoyika.Lilipo Kuti Mudzichitire Nokha.
Amagwiritsidwa ntchito kwambiri mkati mwa nyumba / nyumba.Nyumba (Kitchen, Bathroom, Basement, Playroom, Bathroom, etc.)
Pansi pazamalonda (Bar, Restaurant, Dancing room, Stage, Office, etc).
Titha kukupatsani ntchito imodzi yokha yokhudzana ndi zokongoletsa zamkati, ziribe kanthu kuti ndinu omanga kapena ogulitsa, zinthu zabwino kwambiri komanso mbiri yabwino ya ngongole, zidzapangitsa mgwirizano kukhala kulankhulana kokongola komanso kosangalatsa.
| Kufotokozera | |
| Maonekedwe Pamwamba | Wood Texture |
| Kunenepa Kwambiri | 4 mm |
| Zovala pansi (Mwasankha) | IXPE/EVA(1mm/1.5mm) |
| Valani Layer | 0.3 mm.(Mil 12) |
| M'lifupi | 12" (305mm.) |
| Utali | 24" (610mm.) |
| Malizitsani | Kupaka kwa UV |
| Dinani |  |
| Kugwiritsa ntchito | Zamalonda & Zogona |
| SPC RIGID-CORE PLANK TECHNICAL DATA | ||
| Zambiri Zaukadaulo | Njira Yoyesera | Zotsatira |
| Dimensional | EN427 ndi | Pitani |
| Makulidwe onse | EN428 ndi | Pitani |
| Makulidwe a zigawo zovala | EN429 ndi | Pitani |
| Dimensional Kukhazikika | IOS 23999:2018 & ASTM F2199-18 | Mayendedwe Opanga ≤0.02% (82oC @ 6hrs) |
| Kuzungulira Pakupanga ≤0.03% (82oC @ 6hrs) | ||
| Kupindika (mm) | IOS 23999:2018 & ASTM F2199-18 | Mtengo wa 0.16mm(82oC @ 6hrs) |
| Mphamvu ya Peel (N/25mm) | ASTM D903-98(2017) | Njira Yopanga 62 (Avereji) |
| Kudutsa Njira Yopanga 63 (Avereji) | ||
| Static Load | ASTM F970-17 | Zotsalira Zolowera: 0.01mm |
| Zotsalira Zotsalira | ASTM F1914-17 | Pitani |
| Scratch Resistance | ISO 1518-1: 2011 | Palibe adalowa mu zokutira pa katundu 20N |
| Kukhoma Mphamvu(kN/m) | ISO 24334: 2014 | Njira Yopangira 4.9 kN/m |
| Kudutsa Njira Yopanga 3.1 kN/m | ||
| Mtundu Wachangu Kuwala | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥ 6 |
| Kuchita ndi moto | BS EN14041:2018 Ndime 4.1 & EN 13501-1:2018 | Bfl-S1 |
| Chithunzi cha ASTM E648-17A | Kalasi 1 | |
| Chithunzi cha ASTM E84-18b | Kalasi A | |
| Kutulutsa kwa VOC | TS EN 14041: 2018 | ND - Kupita |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND - Kupita |
| Fikirani | No 1907/2006 REACH | ND - Kupita |
| Kutulutsa kwa formaldehyde | EN 14041: 2018 | Gulu: E1 |
| Phthalate Test | TS EN 14041: 2018 | ND - Kupita |
| PCP | TS EN 14041: 2018 | ND - Kupita |
| Kusamuka kwa Zinthu Zina | EN 71 – 3:2013 | ND - Kupita |
| Zambiri Pakulongedza (4.0mm) | |
| Ma PC/ctn | 12 |
| Kulemera (KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Kulemera (KG)/GW | 24500 |
