Isticmaalka Ganacsiga Dabaqa Dhagaxa Polymer-ka ah ee Isku-dhafka ah
Sharaxaad:
Shayga：JSC503
Dhumucda:4.0mm ~ 8.0mm
Lakabka xidho:0.2mm ~ 0.7mm
Hoosta (Ikhtiyaari):EVA/ IXPE, 1.0mm ~ 2.0mm
Cabbirka：7.25''X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Habaynta
Sababtoo ah ka kooban sagxadda this waa dhagax nuurad iyo budada PVC.Sagxadda SPC waxay noqotaa mid ka mid ah sagxadaha Vinyl ee ugu xasilloon uguna cufan.Inta badan waxaa loogu yeeraa sida xudunta adag, SPC 10 jeer ayay ka saameyn badan tahay iska caabbinta alwaax sagxadaha isku dhafan ee alwaax, iyo sidoo kale aad u deggan, waxayna leedahay iska caabin xoqan oo ka wanaagsan marka loo eego sagxadaha WPC.
Iyada oo leh faa'iidooyin badan sida biyuhu-ilaalinta, iska caabinta xoqan, xasilloonida cabbirka, iyo dammaanadda dheer, iwm, sagxadda SPC waxay haysataa suuqa weyn ee sagxadaha vinyl.Iyo arrin kale oo ka mid ah qiimaha hooseeya ayaa sidoo kale ka dhigaya mid aad iyo aad u caan ah.Marka hore, alaabta ceeriin ee aasaasiga ah ee sagxadaha SPC, budada PVC, iyo budada nuuradda, waa gebi ahaanba deegaanka saaxiibtinimo, taas oo ka dhigaysa sagxada SPC mid ka madax bannaan ur kasta oo ur daran, iyo aan isbeddelayn kiimikooyinka sunta ah.Marka labaad, ma jirto xabag ama kiimiko loo baahan yahay inta lagu jiro rakibidda sagxadda SPC, oo ka kooban walxo waxyeello leh.Ugu dambayn, laakiin ugu yaraan, nidaamka qufulka sare ee sagxadaha SPC-ga ayaa kaa caawin kara rakibiddaada mid fudud oo degdeg ah.Nidaamka qufulku waxa kale oo uu xaqiijiyaa in sagxadaha si degdeg ah loo kala furfuro oo aan waxyeello lahayn.Sidaa darteed, sagxadaha SPC ayaa si weyn loogu talinayaa suuqa iyo qaadashada sagxadaha kale ee vinyl-ka.
| Tilmaamid | |
| Dusha Texture | Qoryaha Qoryaha |
| Dhumucda guud | 5mm |
| Hoosta (ikhtiyaar) | IXPE/EVA(1mm/1.5mm) |
| Lakabka xidho | 0.5mm(20 milyan) |
| Ballaca | 7.25" (184mm.) |
| Dhererka | 48" (1220mm.) |
| dhame | Dahaarka UV |
| Guji |  |
| Codsiga | Ganacsiga & Deegaanka |
| SPC RIGID-CORE XOGTA TECHNICAL PLANK | ||
| Macluumaadka Farsamada | Habka Imtixaanka | Natiijooyinka |
| Cabbir | EN427 & | Gudub |
| Dhumucda guud ahaan | EN428 & | Gudub |
| Dhumucda lakabyada xidhashada | EN429 & | Gudub |
| Deganaanshaha cabbirka | IOS 23999:2018 & ASTM F2199-18 | Jihada wax soo saarka ≤0.02% (82oC @ 6saacadood) |
| Guud ahaan jihada wax-soo-saarka ≤0.03% (82oC @ 6saacadood) | ||
| Curling (mm) | IOS 23999:2018 & ASTM F2199-18 | Qiimaha 0.16mm(82oC @ 6 saacadood) |
| Xoogga diirka (N/25mm) | ASTM D903-98 (2017) | Tilmaamaha Wax-soo-saarka 62 (Celceliska) |
| Guud ahaan jihada wax-soo-saarka 63 (celcelis ahaan) | ||
| Load taagan | ASTM F970-17 | Gelida Hadhaaga:0.01mm |
| Gelitaan Hadhaaga ah | ASTM F1914-17 | Gudub |
| Iska caabinta xoqitaanka | ISO 1518-1: 2011 | Ma jiro dahaarka dhexda u saaran culeyska 20N |
| Quful Quful (kN/m) | ISO 24334:2014 | Jihada wax soo saarka 4.9 kN/m |
| Guud ahaan jihada wax-soo-saarka 3.1 kN/m | ||
| Midabka Xajmiga Iftiinka | ISO 4892-3:2016 Wareega 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥ 6 |
| Falcelinta dabka | TS EN14041: 2018 Farqada 4.1 & EN 13501-1: 2018 | Bfl-S1 |
| ASTM E648-17a | Fasalka 1 | |
| ASTM E 84-18b | Fasalka A | |
| Soosaarka VOC | BS EN 14041:2018 | ND – Gudub |
| ROHS/ Birta culus | EN 71-3:2013+A3:2018 | ND – Gudub |
| Gaadhi | Maya 1907/2006 GAAR | ND – Gudub |
| Formaldehyde sii deynta | BS EN14041:2018 | Fasalka: E 1 |
| Imtixaanka Phthalate | BS EN 14041:2018 | ND – Gudub |
| PCP | BS EN 14041:2018 | ND – Gudub |
| Socdaalka Qaybaha Qaar | EN 71 - 3:2013 | ND – Gudub |
| Macluumaadka Xirmada (4.0mm) | |
| Kumbuyuutar/ctn | 12 |
| Miisaanka(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Miisaanka (KG)/GW | 24500 |
