Farshaxanka Casriga ah ee Sibidhka Cirridka Dabaqa Vinyl
Sharaxaad:
Shayga: TPS016-A
Dhumucda:4.0mm ~ 8.0mm
Lakabka xidho:0.2mm ~ 0.7mm
Underlay (Ikhtiyaar ah):EVA/ IXPE, 1.0mm ~ 2.0mm
Cabbirka:12 "X 24"/ 18" X 18"/ 24" X 24", hagaajin
Sagxinta saamaynta sibidhka waa nooc ka mid ah naqshadaynta sagxadda caadiga ah waxayna ku soo jiidataa jiilka soo koraya dareenkeeda gaarka ah ee naqshadda gudaha ee maanta.Sagxadda sagxadda vinyl ee SPC ee farshaxanka casriga ah waa mid ka mid ah kuwa ugu wanaagsan naqshadaha sagxadahaas.
Iyada oo kala duwanaanshaha qaababka qurxinta gudaha, dad badan iyo aad u badan ayaa jecel minimalism casriga ah ama qaababka qurxinta qaabka warshadaha shaqsiyeed.Dusha sare ee sagxadda waa mid ka mid ah qalabka ugu muhiimsan ee qurxinta ee meesheenna noolasha, waxayna go'aamisaa codka ugu muhiimsan ee qaabka booska.TopJoy KBM125-1 Sagxadda la taaban karo ee casriga ah waxaa si gaar ah loogu talagalay kuwa moodada ah ee qaabka qurxinta avant-garde iyo goobaha ganacsiga, sida kafateeriyada, makhaayadaha, goobaha bandhigga farshaxanka, iwm , ka dibna qallafsanaanteeda dusha sare waxay ku dhowdahay inay gaarto saameynta la mid ah kan sagxadda sibidhka, sida caabbinta abrasion, caabbinta silbashada, midabka midabka, iwm ... Sidaa darteed, waxqabadkeeda qumman ayaa ku filan in loo isticmaalo meelo qoyan, sida sida qolalka hoose, musqulaha, madbakhyada.Isla mar ahaantaana, waxaa lagu dhejin karaa derbiga qolalka qubeyska.
| Tilmaamid | |
| Dusha Texture | Qoryaha Qoryaha |
| Dhumucda guud | 4mm |
| Underlay (Ikhtiyaar ah) | IXPE/EVA(1mm/1.5mm) |
| Lakabka xidho | 0.2mm(8 milyan) |
| Ballaca | 12” |
| Dhererka | 36” |
| dhame | Dahaarka UV |
| Nidaamka Qufulka |
|
| Codsiga | Ganacsiga & Deegaanka |
Xogta Farsamada
| SPC RIGID-CORE XOGTA TECHNICAL PLANK | ||
| Macluumaadka Farsamada | Habka Imtixaanka | Natiijooyinka |
| Cabbir | EN427 & | Gudub |
| Dhumucda guud ahaan | EN428 & | Gudub |
| Dhumucda lakabyada xidhashada | EN429 & | Gudub |
| Deganaanshaha cabbirka | IOS 23999:2018 & ASTM F2199-18 | Jihada wax soo saarka ≤0.02% (82oC @ 6saacadood) |
| Guud ahaan jihada wax-soo-saarka ≤0.03% (82oC @ 6saacadood) | ||
| Curling (mm) | IOS 23999:2018 & ASTM F2199-18 | Qiimaha 0.16mm(82oC @ 6 saacadood) |
| Xoogga diirka (N/25mm) | ASTM D903-98 (2017) | Tilmaamaha Wax-soo-saarka 62 (Celceliska) |
| Guud ahaan jihada wax-soo-saarka 63 (celcelis ahaan) | ||
| Load taagan | ASTM F970-17 | Gelida Hadhaaga:0.01mm |
| Gelitaan Hadhaaga ah | ASTM F1914-17 | Gudub |
| Iska caabinta xoqitaanka | ISO 1518-1: 2011 | Ma jiro dahaarka dhexda u saaran culeyska 20N |
| Quful Quful (kN/m) | ISO 24334:2014 | Jihada wax soo saarka 4.9 kN/m |
| Guud ahaan jihada wax-soo-saarka 3.1 kN/m | ||
| Midabka Xajmiga Iftiinka | ISO 4892-3:2016 Wareega 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥ 6 |
| Falcelinta dabka | TS EN14041: 2018 Farqada 4.1 & EN 13501-1: 2018 | Bfl-S1 |
| ASTM E648-17a | Fasalka 1 | |
| ASTM E 84-18b | Fasalka A | |
| Soosaarka VOC | BS EN 14041:2018 | ND - Gudub |
| ROHS/ Birta culus | EN 71-3:2013+A3:2018 | ND - Gudub |
| Gaadhi | Maya 1907/2006 GAAR | ND - Gudub |
| Formaldehyde sii deynta | BS EN14041:2018 | Fasalka: E 1 |
| Imtixaanka Phthalate | BS EN 14041:2018 | ND - Gudub |
| PCP | BS EN 14041:2018 | ND - Gudub |
| Socdaalka Qaybaha Qaar | EN 71 - 3:2013 | ND - Gudub |
Macluumaadka Xirmada:
| Macluumaadka Xirmada (4.0mm) | |
| Kumbuyuutar/ctn | 12 |
| Miisaanka(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Miisaanka (KG)/GW | 24500 |
