Qurxinta 5mm SPC Qoryaha Muhiimka ah ee Adag
Sharaxaad:
Shayga：BSA 05
Dhumucda:4.0mm ~ 8.0mm
Lakabka xidho:0.2mm ~ 0.7mm
Hoosta (Ikhtiyaari):EVA/ IXPE, 1.0mm ~ 2.0mm
Cabbirka：7.25''X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Habaynta
TopJoy SPC sagxadda sagxadda sagxadda vinyl ee udub-dhexaadka ah waxaa lagu sameeyay walxaha Eco-saaxiibtinimo.Xudunta adag ee SPC-da ayaa ah biyaha celinaysa, markaa biyuhu ma geli karaan dhulka.Dhumucda 5mm SPC looxa ayaa ku habboon qurxinta guriga, Makhaayadaha, dhismayaasha xafiisyada iwm.
TopJoy SPC sagxadda sagxadda looxa xudunta u ah ee adag waxay leedahay qaabab alwaax qurux badan oo macquul ah.TopJoy waxay ku siinaysaa midabyo kala duwan oo cabitaan ah oo aad dooratay.Sagxadda SPC waxay ku salaysan tahay 100% walxo bikrad ah.Waa adkaysi, biyaha u adkaysta, aan sanqadh lahayn, xoqin iyo dab-demiska.Waxaan helnay dhammaan shahaadooyinka lagama maarmaanka ah sida SGS, CE si loogu iibiyo suuqaaga.
Iska caabbinta sibidhka ayaa sagxadda SPC ka dhigaysa mid ku habboon qolalka qoob ka ciyaarka iyo musqulaha.Sidoo kale waa saaxiib-caruur iyo odayaal-saaxiibtinimo.
Lakabka xidhashada tayada sare leh taasoo ka dhigaysa mid si gaar ah wasakh iyo xoqan u adkaysanaysa.Sagxada SPC waxay leedahay dhabarka hoose, way ka diirran tahay cagaha hoosteeda marka loo eego foornada ama dhagaxa dhaqameed.Oo waa dahaarka dhawaaqa kaas oo dila buuqa qolka.Waxay leedahay nidaam gujis gaar ah, hoos u dhigista qiimaha xoogga shaqada sidaas darteed waxay ka dhigaysaa inay noqoto doorasho dhaqaale oo loogu talagalay degaan iyo ganacsi.Sidoo kale sagxadda SPC way fududahay in la nadiifiyo.Marka ay biyuhu daadanayaan, waxaad isticmaashaa xaaqin si aad biyaha u nadiifiso.Waxay qaadataa wakhti iyo kharash aad uga yar dayactirka sagxadda.
Qof kastaa wuxuu jecel yahay dabaq qurux badan.Helitaanka midka aad jeceshahay ee lagu qurxiyo gurigaaga waxay si fiican u buuxin doontaa dareenkaaga.
| Tilmaamid | |
| Dusha Texture | Qoryaha Qoryaha |
| Dhumucda guud | 4mm |
| Hoosta (ikhtiyaar) | IXPE/EVA(1mm/1.5mm) |
| Lakabka xidho | 0.3mm(12 milyan) |
| Ballaca | 7.25" (184mm.) |
| Dhererka | 48" (1220mm.) |
| dhame | Dahaarka UV |
| Guji |  |
| Codsiga | Ganacsiga & Deegaanka |
| SPC RIGID-CORE XOGTA TECHNICAL PLANK | ||
| Macluumaadka Farsamada | Habka Imtixaanka | Natiijooyinka |
| Cabbir | EN427 & | Gudub |
| Dhumucda guud ahaan | EN428 & | Gudub |
| Dhumucda lakabyada xidhashada | EN429 & | Gudub |
| Deganaanshaha cabbirka | IOS 23999:2018 & ASTM F2199-18 | Jihada wax soo saarka ≤0.02% (82oC @ 6saacadood) |
| Guud ahaan jihada wax-soo-saarka ≤0.03% (82oC @ 6saacadood) | ||
| Curling (mm) | IOS 23999:2018 & ASTM F2199-18 | Qiimaha 0.16mm(82oC @ 6 saacadood) |
| Xoogga diirka (N/25mm) | ASTM D903-98 (2017) | Tilmaamaha Wax-soo-saarka 62 (Celceliska) |
| Guud ahaan jihada wax-soo-saarka 63 (celcelis ahaan) | ||
| Load taagan | ASTM F970-17 | Gelida Hadhaaga:0.01mm |
| Gelitaan Hadhaaga ah | ASTM F1914-17 | Gudub |
| Iska caabinta xoqitaanka | ISO 1518-1: 2011 | Ma jiro dahaarka dhexda u saaran culeyska 20N |
| Quful Quful (kN/m) | ISO 24334:2014 | Jihada wax soo saarka 4.9 kN/m |
| Guud ahaan jihada wax-soo-saarka 3.1 kN/m | ||
| Midabka Xajmiga Iftiinka | ISO 4892-3:2016 Wareega 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥ 6 |
| Falcelinta dabka | TS EN14041: 2018 Farqada 4.1 & EN 13501-1: 2018 | Bfl-S1 |
| ASTM E648-17a | Fasalka 1 | |
| ASTM E 84-18b | Fasalka A | |
| Soosaarka VOC | BS EN 14041:2018 | ND – Gudub |
| ROHS/ Birta culus | EN 71-3:2013+A3:2018 | ND – Gudub |
| Gaadhi | Maya 1907/2006 GAAR | ND – Gudub |
| Formaldehyde sii deynta | BS EN14041:2018 | Fasalka: E 1 |
| Imtixaanka Phthalate | BS EN 14041:2018 | ND – Gudub |
| PCP | BS EN 14041:2018 | ND – Gudub |
| Socdaalka Qaybaha Qaar | EN 71 - 3:2013 | ND – Gudub |
| Macluumaadka Xirmada (4.0mm) | |
| Kumbuyuutar/ctn | 12 |
| Miisaanka(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Miisaanka (KG)/GW | 24500 |
