Sagxadda SPC waxay dheellitiraysaa qaabka iyo shaqeynta
Sharaxaad:
Shayga:TJ1105-KB11
Dhumucda:4.0mm ~ 8.0mm
Lakabka xidho:0.2mm ~ 0.7mm
Underlay (Ikhtiyaar ah):EVA/ IXPE, 1.0mm ~ 2.0mm
Cabbirka：7.25''X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Habaynta
Waa maxay nooca sagxadaha aad u dooranayso gurigaaga ama xafiiskaaga?Mid kale ha dooran, aan ahayn SPC-da adag, maadaama ay kala duwan tahay, waxay dheelitiri kartaa qaabka iyo shaqeynta.
Sagxadda SPC waxay ku ekaan kartaa nooc kasta oo sagxadaha alwaax ah ama dhoobada dhoobada ah iyo sagxadaha dhagaxa.Sagxadaha SPC ee noocyada caanka ah waa 100% biyuhu-mareenka, oo aan xasaasi u ahayn heerkulka iyo huurka.Haddii aad ku nooshahay deegaan qoyaan badan, SPC dabaqa udub-dhexaadka ah waa doorasho fiican.
SPC waa DIY-saaxiibtinimo.Thanks to nidaamka qufulka patent-ka, way fududahay in la rakibo, iyada oo qayb kasta oo sagxadda ah ay ku xidhan tahay loox ama foorno ku xiga.Dhanka kale, xabagta looxa vinyl ama sagxadda sagxadda waa ay adagtahay in la rakibo, marka waxaa laga yaabaa inaad u baahato inaad hesho rakibe xirfad leh.
Sidan oo kale, haddii aad raadinayso sagxad quruxsan oo aad weli lacag kaydsanayso, maalgelinta sabbaynaya looxa vinyl ee SPC ayaa macno samaynaya.
| Tilmaamid | |
| Dusha Texture | Qoryaha Qoryaha |
| Dhumucda guud | 4mm |
| Underlay (Ikhtiyaar ah) | IXPE/EVA(1mm/1.5mm) |
| Lakabka xidho | 0.2mm(8 milyan) |
| Ballaca | 7.25" (184mm.) |
| Dhererka | 48" (1220mm.) |
| dhame | Dahaarka UV |
| Nidaamka Qufulka |
|
| Codsiga | Ganacsiga & Deegaanka |
Xogta Farsamada
| SPC RIGID-CORE XOGTA TECHNICAL PLANK | ||
| Macluumaadka Farsamada | Habka Imtixaanka | Natiijooyinka |
| Cabbir | EN427 & | Gudub |
| Dhumucda guud ahaan | EN428 & | Gudub |
| Dhumucda lakabyada xidhashada | EN429 & | Gudub |
| Deganaanshaha cabbirka | IOS 23999:2018 & ASTM F2199-18 | Jihada wax soo saarka ≤0.02% (82oC @ 6saacadood) |
| Guud ahaan jihada wax-soo-saarka ≤0.03% (82oC @ 6saacadood) | ||
| Curling (mm) | IOS 23999:2018 & ASTM F2199-18 | Qiimaha 0.16mm(82oC @ 6 saacadood) |
| Xoogga diirka (N/25mm) | ASTM D903-98 (2017) | Tilmaamaha Wax-soo-saarka 62 (Celceliska) |
| Guud ahaan jihada wax-soo-saarka 63 (celcelis ahaan) | ||
| Load taagan | ASTM F970-17 | Gelida Hadhaaga:0.01mm |
| Gelitaan Hadhaaga ah | ASTM F1914-17 | Gudub |
| Iska caabinta xoqitaanka | ISO 1518-1: 2011 | Ma jiro dahaarka dhexda u saaran culeyska 20N |
| Quful Quful (kN/m) | ISO 24334:2014 | Jihada wax soo saarka 4.9 kN/m |
| Guud ahaan jihada wax-soo-saarka 3.1 kN/m | ||
| Midabka Xajmiga Iftiinka | ISO 4892-3:2016 Wareega 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥ 6 |
| Falcelinta dabka | TS EN14041: 2018 Farqada 4.1 & EN 13501-1: 2018 | Bfl-S1 |
| ASTM E648-17a | Fasalka 1 | |
| ASTM E 84-18b | Fasalka A | |
| Soosaarka VOC | BS EN 14041:2018 | ND - Gudub |
| ROHS/ Birta culus | EN 71-3:2013+A3:2018 | ND - Gudub |
| Gaadhi | Maya 1907/2006 GAAR | ND - Gudub |
| Formaldehyde sii deynta | BS EN14041:2018 | Fasalka: E 1 |
| Imtixaanka Phthalate | BS EN 14041:2018 | ND - Gudub |
| PCP | BS EN 14041:2018 | ND - Gudub |
| Socdaalka Qaybaha Qaar | EN 71 - 3:2013 | ND - Gudub |
Macluumaadka Xirmada:
| Macluumaadka Xirmada (4.0mm) | |
| Kumbuyuutar/ctn | 12 |
| Miisaanka(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Miisaanka (KG)/GW | 24500 |
