Biyo-ilaalinta SPC Core Hadhuudh Qoryaha Dhammaystir sagxadda
Sharaxaad:
Shayga:TPW005-E
Dhumucda:4.0mm ~ 8.0mm
Lakabka xidho:0.2mm ~ 0.7mm
Underlay (Ikhtiyaar ah):EVA/ IXPE, 1.0mm ~ 2.0mm
Cabbirka:7.25''X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Habaynta
Ka samaysan walxo tayo sare leh, ilaalinta deegaanka iyo badbaadada.TopJoy sagxad alwaax ah, TPW005-E, waxay gurigaaga u keentaa dareen raaxo leh iyada oo loo marayo midab iyo midab dabiici ah.
Dadka qaarkiis waxay yiraahdaan sagxadda SPC waa waxa ugu fiican ee ku xiga alwaax dhab ah ama dhoobada dhoobada, laakiin dhab ahaantii waxaan aaminsanahay inay ka fiican tahay!U roon in si fudud loo rakibo, oo u roon caabbinta biyaha, u roon dhimista buuqa, u fiican miisaaniyadaada, oo u fiican meeraha!Wax geedo ah oo waxyeello loo geystay ma jirto si ay kuu keenaan sagxadda ugu quruxda badan ee alwaax, weligaa kama welweli doontid inaad beddesho foorno dillaacsan ama aad soo qaadatid kab!
Waa xoqin xoog leh iyo iska caabin xoqan, taas oo si fudud u aqbali karta xagashada kala duwan sida lugaha miiska, kuraasta, bacaha xayawaanka, iwm iyada oo aan waxyeello u geysan dhulka.
Intaa waxaa dheer, rakibidda sagxadaha SPC sidoo kale aad bay u dhakhso badan tahay.Uma baahnid diyaarinta sagxadda dhulka hoostiisa, ma jirto wakhti la qabsan karo, waxaana lagu rakibi karaa sagxadaha adag ee jira sida shubka, dhoobada hore ee dhoobada, alwaax ama sagxadda vinyl ee aan barkin lahayn.
Haddii aad raadinayso sagxad waara, raagaya & biyo-celin ah oo kor u qaadaya muuqaalka meel kasta oo aan bangiga jabin doonin, soo dir su'aasha hadda
| Tilmaamid | |
| Dusha Texture | Qoryaha Qoryaha |
| Dhumucda guud | 4mm |
| Underlay (Ikhtiyaar ah) | IXPE/EVA(1mm/1.5mm) |
| Lakabka xidho | 0.2mm(8 milyan) |
| Ballaca | 7.25" (184mm.) |
| Dhererka | 48" (1220mm.) |
| dhame | Dahaarka UV |
| Nidaamka Qufulka |
|
| Codsiga | Ganacsiga & Deegaanka |
Xogta Farsamada
| SPC RIGID-CORE XOGTA TECHNICAL PLANK | ||
| Macluumaadka Farsamada | Habka Imtixaanka | Natiijooyinka |
| Cabbir | EN427 & | Gudub |
| Dhumucda guud ahaan | EN428 & | Gudub |
| Dhumucda lakabyada xidhashada | EN429 & | Gudub |
| Deganaanshaha cabbirka | IOS 23999:2018 & ASTM F2199-18 | Jihada wax soo saarka ≤0.02% (82oC @ 6saacadood) |
| Guud ahaan jihada wax-soo-saarka ≤0.03% (82oC @ 6saacadood) | ||
| Curling (mm) | IOS 23999:2018 & ASTM F2199-18 | Qiimaha 0.16mm(82oC @ 6 saacadood) |
| Xoogga diirka (N/25mm) | ASTM D903-98 (2017) | Tilmaamaha Wax-soo-saarka 62 (Celceliska) |
| Guud ahaan jihada wax-soo-saarka 63 (celcelis ahaan) | ||
| Load taagan | ASTM F970-17 | Gelida Hadhaaga:0.01mm |
| Gelitaan Hadhaaga ah | ASTM F1914-17 | Gudub |
| Iska caabinta xoqitaanka | ISO 1518-1: 2011 | Ma jiro dahaarka dhexda u saaran culeyska 20N |
| Quful Quful (kN/m) | ISO 24334:2014 | Jihada wax soo saarka 4.9 kN/m |
| Guud ahaan jihada wax-soo-saarka 3.1 kN/m | ||
| Midabka Xajmiga Iftiinka | ISO 4892-3:2016 Wareega 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥ 6 |
| Falcelinta dabka | TS EN14041: 2018 Farqada 4.1 & EN 13501-1: 2018 | Bfl-S1 |
| ASTM E648-17a | Fasalka 1 | |
| ASTM E 84-18b | Fasalka A | |
| Soosaarka VOC | BS EN 14041:2018 | ND - Gudub |
| ROHS/ Birta culus | EN 71-3:2013+A3:2018 | ND - Gudub |
| Gaadhi | Maya 1907/2006 GAAR | ND - Gudub |
| Formaldehyde sii deynta | BS EN14041:2018 | Fasalka: E 1 |
| Imtixaanka Phthalate | BS EN 14041:2018 | ND - Gudub |
| PCP | BS EN 14041:2018 | ND - Gudub |
| Socdaalka Qaybaha Qaar | EN 71 - 3:2013 | ND - Gudub |
Macluumaadka Xirmada:
| Macluumaadka Xirmada (4.0mm) | |
| Kumbuyuutar/ctn | 12 |
| Miisaanka(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Miisaanka (KG)/GW | 24500 |
