Biyo-ilaalinta Riix Qufulka Hadhuudhka Qoryaha SPC Xudunta Adag
Sharaxaad:
Shayga:TPW001
Dhumucda:4.0mm ~ 8.0mm
Lakabka xidho:0.2mm ~ 0.7mm
Underlay (Ikhtiyaar ah):EVA/ IXPE, 1.0mm ~ 2.0mm
Cabbirka:7.25''X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Habaynta
Sagxadaha vinyl-ka ee asaasiga ah waxay soo mareen waddo dheer tan iyo markii ay bilowgoodu hooseeyaan sida beddelka qaaliga ah ee dabaqyada adag ee dhaqameed.Mid ka mid ah shay aan isbeddelin waa la awoodi karo - laakiin tayada ayaa ku jirta saqafka!Dabaqyada vinyl-kayaga waxay leeyihiin muuqaal alwaax ah oo dhab ah oo ay fududahay in la rakibo oo xitaa sahlanaato in la ilaaliyo.
Dabaqa vinyl ee udub-dhexaadka ah waa 100% biyuhu-mareen.Waxaa la naqshadeeyay in la isku daro sifooyinka ugu fiican ee vinyl iyo laminate si wada jir ah loogu siiyo xalka ugu dambeeya ee sagxadda mashruuc kasta.Faa'iidooyinka ugu muhiimsan waa sida soo socota:
- Ilaa 0.7 mm Lakabka Xiro - Laba jeer dhumucda heerka ganacsiga
- FloorScore waa la xaqiijiyay
- 100% Biyo-ilaaliya SPC Qoryaha Muhiimka ah ee Adag - Ka xasilloon marka loo eego heerka caadiga ah ee LVP
- Dabaqa DIY - Guji & Quful Rakibaadda
- Hoos-u-xidhka Hore-u-ku-xidhnaanta - Deggan, ka jilicsan, dabaqa ka go'an
Haddii aad raadinayso sagxad waara, raagaya & biyo-celin ah oo kor u qaadaya muuqaalka meel kasta oo aan bangiga jabin doonin, soo dir su'aasha hadda
| Tilmaamid | |
| Dusha Texture | Qoryaha Qoryaha |
| Dhumucda guud | 4mm |
| Underlay (Ikhtiyaar ah) | IXPE/EVA(1mm/1.5mm) |
| Lakabka xidho | 0.2mm(8 milyan) |
| Ballaca | 7.25" (184mm.) |
| Dhererka | 48" (1220mm.) |
| dhame | Dahaarka UV |
| Nidaamka Qufulka |
|
| Codsiga | Ganacsiga & Deegaanka |
Xogta Farsamada
| SPC RIGID-CORE XOGTA TECHNICAL PLANK | ||
| Macluumaadka Farsamada | Habka Imtixaanka | Natiijooyinka |
| Cabbir | EN427 & | Gudub |
| Dhumucda guud ahaan | EN428 & | Gudub |
| Dhumucda lakabyada xidhashada | EN429 & | Gudub |
| Deganaanshaha cabbirka | IOS 23999:2018 & ASTM F2199-18 | Jihada wax soo saarka ≤0.02% (82oC @ 6saacadood) |
| Guud ahaan jihada wax-soo-saarka ≤0.03% (82oC @ 6saacadood) | ||
| Curling (mm) | IOS 23999:2018 & ASTM F2199-18 | Qiimaha 0.16mm(82oC @ 6 saacadood) |
| Xoogga diirka (N/25mm) | ASTM D903-98 (2017) | Tilmaamaha Wax-soo-saarka 62 (Celceliska) |
| Guud ahaan jihada wax-soo-saarka 63 (celcelis ahaan) | ||
| Load taagan | ASTM F970-17 | Gelida Hadhaaga:0.01mm |
| Gelitaan Hadhaaga ah | ASTM F1914-17 | Gudub |
| Iska caabinta xoqitaanka | ISO 1518-1: 2011 | Ma jiro dahaarka dhexda u saaran culeyska 20N |
| Quful Quful (kN/m) | ISO 24334:2014 | Jihada wax soo saarka 4.9 kN/m |
| Guud ahaan jihada wax-soo-saarka 3.1 kN/m | ||
| Midabka Xajmiga Iftiinka | ISO 4892-3:2016 Wareega 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥ 6 |
| Falcelinta dabka | TS EN14041: 2018 Farqada 4.1 & EN 13501-1: 2018 | Bfl-S1 |
| ASTM E648-17a | Fasalka 1 | |
| ASTM E 84-18b | Fasalka A | |
| Soosaarka VOC | BS EN 14041:2018 | ND - Gudub |
| ROHS/ Birta culus | EN 71-3:2013+A3:2018 | ND - Gudub |
| Gaadhi | Maya 1907/2006 GAAR | ND - Gudub |
| Formaldehyde sii deynta | BS EN14041:2018 | Fasalka: E 1 |
| Imtixaanka Phthalate | BS EN 14041:2018 | ND - Gudub |
| PCP | BS EN 14041:2018 | ND - Gudub |
| Socdaalka Qaybaha Qaar | EN 71 - 3:2013 | ND - Gudub |
Macluumaadka Xirmada:
| Macluumaadka Xirmada (4.0mm) | |
| Kumbuyuutar/ctn | 12 |
| Miisaanka(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Miisaanka (KG)/GW | 24500 |
