Qaabka alwaax SPC Tile
Sharaxaad:
Shayga：JSD07
Dhumucda:4.0mm ~ 8.0mm
Lakabka xidho:0.2mm ~ 0.7mm
Hoosta (Ikhtiyaar ah):EVA/ IXPE, 1.0mm ~ 2.0mm
Cabbirka：7.25''X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Habaynta
Foornada sagxadda SPC waxay leedahay qaab alwaax ah, qaab farshaxan oo leh DIY.
Waa inaan hubinno inaan fahamno rakibaadda sagxadda SPC ee nidaamyada gujinta Unilin.Markaa waxaan si fudud u rakibi karnaa sagxada SPC nafteena.
Dadka intooda badan waxay jecel yihiin dabeecadda waxayna taageereyaal weyn u yihiin sagxadaha alwaaxyada marka ay u yimaadaan inay qurxiyaan guryahooda iyo aqaladooda.Laakin iyada oo la sii dardargeliyay kulaylka caalamiga ah iyo xaalufka ka badan, dadku waxay bilaabaan inay ogaadaan in khayraadka dabiiciga ahi aanu ahayn mid xadidan, gaar ahaan kuwa yar yar.At TopJoy waxay naqshadaysaa sagxadda sagxadda, waxaan ku haynaa Qaabka alwaax ee SPC Tile si la mid ah sida aad u jeclaan lahayd sagxadaha alwaaxyada dabiiciga ah inay u ekaadaan.Laga soo bilaabo hooska iyo noocyada ilaa qaababka hadhuudhka iyo qaabka alwaax adag oo dhab ah, SPC Dufanka sagxadda sagxadda waxay si cajiib ah u kordhisaa xaqiiqada ah in la haysto sagxadaha alwaaxyada dabiiciga ah ee gurigaaga.
Intaa waxaa dheer, mahad tignoolajiyada dhijitaalka ah ee modem-ka, TOPJOY Qaabka Wood Pattern SPC Tile wuxuu u eg yahay mid dhab ah oo dabiici ah oo leh Emboss In Register (ERI) oogada sare wuxuuna haystaa in ka badan 1000 qaab oo la dooran karo.Waxaan rajeyneynaa in SPC-ga sagxadda sagxadda SPC uu dabeecadda soo geliyo booskaaga, taasoo ka dhigaysa biophilic iyo deegaan-saaxiibtinimo.Meesha noocaas ah, dadku waxay la kulmi doonaan hal-abuur la xoojiyey waxayna dareemayaan dib u soo celin dheeraad ah.
| Tilmaamid | |
| Dusha Texture | Qoryaha Qoryaha |
| Dhumucda guud | 8mm |
| Hoosta (ikhtiyaar) | IXPE/EVA(1mm/1.5mm) |
| Lakabka xidho | 0.7mm(28 milyan) |
| Ballaca | 6" (152mm.) |
| Dhererka | 48" (1220mm.) |
| dhame | Dahaarka UV |
| Guji |  |
| Codsiga | Ganacsiga & Deegaanka |
| SPC RIGID-CORE XOGTA TECHNICAL PLANK | ||
| Macluumaadka Farsamada | Habka Imtixaanka | Natiijooyinka |
| Cabbir | EN427 & | Gudub |
| Dhumucda guud ahaan | EN428 & | Gudub |
| Dhumucda lakabyada xidhashada | EN429 & | Gudub |
| Deganaanshaha cabbirka | IOS 23999:2018 & ASTM F2199-18 | Jihada wax soo saarka ≤0.02% (82oC @ 6saacadood) |
| Guud ahaan jihada wax-soo-saarka ≤0.03% (82oC @ 6saacadood) | ||
| Curling (mm) | IOS 23999:2018 & ASTM F2199-18 | Qiimaha 0.16mm(82oC @ 6 saacadood) |
| Xoogga diirka (N/25mm) | ASTM D903-98 (2017) | Tilmaamaha Wax-soo-saarka 62 (Celceliska) |
| Guud ahaan jihada wax-soo-saarka 63 (celcelis ahaan) | ||
| Load taagan | ASTM F970-17 | Gelida Hadhaaga:0.01mm |
| Gelitaan Hadhaaga ah | ASTM F1914-17 | Gudub |
| Iska caabinta xoqitaanka | ISO 1518-1: 2011 | Ma jiro dahaarka dhexda u saaran culeyska 20N |
| Quful Quful (kN/m) | ISO 24334:2014 | Jihada wax soo saarka 4.9 kN/m |
| Guud ahaan jihada wax-soo-saarka 3.1 kN/m | ||
| Midabka Xajmiga Iftiinka | ISO 4892-3:2016 Wareega 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥ 6 |
| Falcelinta dabka | TS EN14041: 2018 Farqada 4.1 & EN 13501-1: 2018 | Bfl-S1 |
| ASTM E648-17a | Fasalka 1 | |
| ASTM E 84-18b | Fasalka A | |
| Soosaarka VOC | BS EN 14041:2018 | ND – Gudub |
| ROHS/ Birta culus | EN 71-3:2013+A3:2018 | ND – Gudub |
| Gaadhi | Maya 1907/2006 GAAR | ND – Gudub |
| Formaldehyde sii deynta | BS EN14041:2018 | Fasalka: E 1 |
| Imtixaanka Phthalate | BS EN 14041:2018 | ND – Gudub |
| PCP | BS EN 14041:2018 | ND – Gudub |
| Socdaalka Qaybaha Qaar | EN 71 - 3:2013 | ND – Gudub |
| Macluumaadka Xirmada (4.0mm) | |
| Kumbuyuutar/ctn | 12 |
| Miisaanka(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Miisaanka (KG)/GW | 24500 |
