Naqshad alwaax ah SPC Sagxadaha Vinyl-ka ee Core ee adag ee guriga
Sharaxaad:
Shayga:TJ1082-KBL
Dhumucda:4.0mm ~ 8.0mm
Lakabka xidho:0.2mm ~ 0.7mm
Underlay (Ikhtiyaar ah):EVA/ IXPE, 1.0mm ~ 2.0mm
Cabbirka:7.25''X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Habaynta
Markaad doorato SPC sagxadda vinyl ee udub-dhexaadka ah, waxaad ku raaxaysan kartaa quruxda alaabta sida slate, oo si farshaxanimo leh loogu qabtay sagxadaha vinyl-ka ee dhagaxa ah.Qol kasta oo gurigaaga ka mid ah waa OK, xitaa socodka badan hoostiisa, qoyaan sare iyo saameyn sare.
SPC sagxadaha Vinyl ee asaasiga ah waxay leeyihiin faa'iidooyin dhowr ah oo ka dhigaya maalgashi adag, waxayna si gaar ah waxtar u tahay qoysaska leh xayawaanka rabaayada ah iyo carruurta. Rakibaadda sahlan iyo qiimaha la awoodi karo ayaa sidoo kale kaa caawin doona inaad hoos u dhigto kharashka. sidoo kale way fududahay in la helo muuqaal ku habboon qaabkaaga.
Qaab alwaax ah TJ1082-KBL SPC sagxadda vinyl ee asaasiga ah ee adag, bevels la xoojiyay iyo kala duwanaanta midabka quruxda badan ayaa siinaya muuqaalka dhabta ah iyo dareenka dhabta ah, iyada oo aan dhib lahayn waxa dhabta ah ayaa keena.Fursadaha kala duwan ee kala duwan ayaa doorbidaya kuwa doonaya inay awood u yeeshaan inay habeeyaan muuqaalka gurigooda.Waxaa lagu rakibi karaa aagagga guriga sida qolalka dharka lagu dhaqdo, musqulaha, saqafka hoose, iyo madbakhyada.
| Tilmaamid | |
| Dusha Texture | Qoryaha Qoryaha |
| Dhumucda guud | 4mm |
| Underlay (Ikhtiyaar ah) | IXPE/EVA(1mm/1.5mm) |
| Lakabka xidho | 0.2mm(8 milyan) |
| Ballaca | 7.25" (184mm.) |
| Dhererka | 48" (1220mm.) |
| dhame | Dahaarka UV |
| Nidaamka Qufulka |
|
| Codsiga | Ganacsiga & Deegaanka |
Xogta Farsamada
| SPC RIGID-CORE XOGTA TECHNICAL PLANK | ||
| Macluumaadka Farsamada | Habka Imtixaanka | Natiijooyinka |
| Cabbir | EN427 & | Gudub |
| Dhumucda guud ahaan | EN428 & | Gudub |
| Dhumucda lakabyada xidhashada | EN429 & | Gudub |
| Deganaanshaha cabbirka | IOS 23999:2018 & ASTM F2199-18 | Jihada wax soo saarka ≤0.02% (82oC @ 6saacadood) |
| Guud ahaan jihada wax-soo-saarka ≤0.03% (82oC @ 6saacadood) | ||
| Curling (mm) | IOS 23999:2018 & ASTM F2199-18 | Qiimaha 0.16mm(82oC @ 6 saacadood) |
| Xoogga diirka (N/25mm) | ASTM D903-98 (2017) | Tilmaamaha Wax-soo-saarka 62 (Celceliska) |
| Guud ahaan jihada wax-soo-saarka 63 (celcelis ahaan) | ||
| Load taagan | ASTM F970-17 | Gelida Hadhaaga:0.01mm |
| Gelitaan Hadhaaga ah | ASTM F1914-17 | Gudub |
| Iska caabinta xoqitaanka | ISO 1518-1: 2011 | Ma jiro dahaarka dhexda u saaran culeyska 20N |
| Quful Quful (kN/m) | ISO 24334:2014 | Jihada wax soo saarka 4.9 kN/m |
| Guud ahaan jihada wax-soo-saarka 3.1 kN/m | ||
| Midabka Xajmiga Iftiinka | ISO 4892-3:2016 Wareega 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥ 6 |
| Falcelinta dabka | TS EN14041: 2018 Farqada 4.1 & EN 13501-1: 2018 | Bfl-S1 |
| ASTM E648-17a | Fasalka 1 | |
| ASTM E 84-18b | Fasalka A | |
| Soosaarka VOC | BS EN 14041:2018 | ND - Gudub |
| ROHS/ Birta culus | EN 71-3:2013+A3:2018 | ND - Gudub |
| Gaadhi | Maya 1907/2006 GAAR | ND - Gudub |
| Formaldehyde sii deynta | BS EN14041:2018 | Fasalka: E 1 |
| Imtixaanka Phthalate | BS EN 14041:2018 | ND - Gudub |
| PCP | BS EN 14041:2018 | ND - Gudub |
| Socdaalka Qaybaha Qaar | EN 71 - 3:2013 | ND - Gudub |
Macluumaadka Xirmada:
| Macluumaadka Xirmada (4.0mm) | |
| Kumbuyuutar/ctn | 12 |
| Miisaanka(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Miisaanka (KG)/GW | 24500 |
