Sephetho sa letlapa la samente SPC tobetsa ho notlela vinyl fatše
Tlhaloso:
Ntho ea bohlokoa: TPS004-B
Botenya:4.0mm ~ 8.0mm
Wear Layer:0.2mm ~ 0.7mm
Katlase (Ka boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:12" X 24"/ 18" X 18"/ 24" X 24", Ho itloaetsa
SPC tobetsa ho notlela lithaele tsa vinyl ha li fumanehe feela ka ponahalo ea lehong joalo ka ha batho ba bangata ba tseba.E tla le phello ea konkreite kapa samente ka boholo bo tsebahalang ba 12" x24 "le 24"x24" matsatsing ana.Theknoloji e ncha ea majabajaba ea vinyl e kopantsoeng le setaele sa khale sa sekolo e tlisa moea o khethehileng sebakeng sa hau.
TopJoy SPC tobetsa ho notlela fatše, Pokello: INDUSTRIE, e na le moralo oa mokhabiso oa letlapa la samente.E fumaneha ka mebala e 'meli ea mebala e le "Dark gray" (Decor-A) le Light grey (Decor-B), e loketseng sebaka sa kahare sa indasteri.Moralo o boetse o kopana le tatso ea minimalist empa ka ts'ebetso e sebetsang haholoanyane.Mabato ha a na metsi ka 100% feela, ha a na litšila ebile ha a na tikoloho empa a boetse a futhumala ka tlas'a maoto a bile a sa thelle ka li-cores tsa TopJoy tse khethehileng tsa SPC.
Tile ea SPC e entsoe ka likarolo tse 4 tsa li-micro-bevel tse nang le sistimi e notlelang ea Uniclic, ho bonolo haholo ho e kenya le ho e sebelisa hape.Ke mokato o motle haholo bakeng sa mokato o ka tlase, phaposi ea ho hlatsoetsa liaparo kapa libaka tsa sechaba joalo ka li-theme theme pubs, libara kapa libaka tse ling tse bonang batho ba bangata empa ba na le tekanyetso e lekanyelitsoeng.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ka boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.2 limilimithara.(8 Mil.) |
| Bophara | 7.25" (184mm.) |
| Bolelele | 48" (1220mm.) |
| Qetella | Ho roala ha UV |
| Locking System |
|
| Kopo | Khoebo & Bolulo |
Lintlha tsa Tekheniki:
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND - Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND - Feta |
| Finyella | No 1907/2006 REACH | ND - Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND - Feta |
| PCP | BS EN 14041:2018 | ND - Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND - Feta |
Lintlha tsa ho paka:
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
