Moralo oa Lejoe la Moralo o Moputsoa o Khabane o benyang
Tlhaloso:
Ntho:TYM 216
Botenya:4.0mm ~ 8.0mm
Apara Layer:0.2mm ~ 0.7mm
Katlase (Taba ea boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:12" X 24"/ 12" X 12"/ Ho iketsetsa
TYM 216 ke tile ea vinyl e sa keneleng metsi 'me e tšoarella ka mokhoa o ikhethang.Khetho e ntle bakeng sa batho e na le liphoofolo tse ruuoang lapeng.Boima bo phahameng ba mantlha bo eketsa ho hanyetsa tšusumetso le ho fana ka botsitso bo feteletseng.Boholo ba tile bo tloaelehileng ke lisenthimithara tse 12 ka lisenthimithara tse 24.Ka ho notlela Uniclick, ho bonolo ho e kenya le ho e nkela sebaka.
Motheo o thata oa fatše ha o kenelle metsi ka 100%, empa hape o na le lipono tse khahlehang, 'me o phutholohile ka tlas'a maoto, o loketse lits'ebetso tsa bolulo le tsa khoebo.TYM 216 ke moralo o sa feleng o motle oa 'mabole o moputsoa o shebileng fatše.Ka bohlooho bo batang, setulo sena sa fatše se ka nkoa e le lejoe la 'nete.Leha ho le joalo, u se ke ua lumella sebopeho sa mokato ona hore se u thetse!Phetoho ea SPC - motsoako oa polasetiki oa majoe - o entsoe ka lejoe la mokoetla kahoo mokato oa hau o tla phutholoha ho tsamaea, empa o le matla joalo ka lejoe, o o fa bokhoni ba ho phela bophelo bohle.Fumana ponahalo ea 'mabole o moputsoa hae ka meralo ea rona ea fatše ea SPC e etsang khetho e ntle le e sebetsang ho fapana le ntho ea nnete.IXPE kapa EVA pad e ka hokelloa mokokotlong oa tile haeba u batla ka tlas'a maoto a bonolo.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ha ho boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.3 limilimithara.(12 Mil.) |
| Bophara | 12" (305mm.) |
| Bolelele | 24" (610mm.) |
| Qetella | Ho roala ha UV |
| Tobetsa |  |
| Kopo | Khoebo & Bolulo |
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
