Thepa ea Lehae ea vinyl Flooring Plank
Tlhaloso:
Ntho:JSD35
Botenya:4.0mm ~ 8.0mm
Apara Layer:0.2mm ~ 0.7mm
Katlase (Taba ea boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Customization
Na u batla ho ntlafatsa ntlo ea hau, ofisi kapa karache ka theko e tlase?Ka mor'a nako, kamore ea hau e tla fetoha ka mokhoa o makatsang!E ka sebelisoa ka phaposing efe kapa efe ka tlung ea hau joalo ka Kichine, Likamore tsa ho jella, Likamore tsa ho robala le Libethe.
Ha ho tluoa tabeng ea ho khetha fatše e le 'ngoe bakeng sa ntlo ea hau, u ka ferekanya ho tloha LVT, LVP, laminate flooring, flooring enjinere ... joalo-joalo.SPC Vinyl Flooring e tla ba khetho e ntle.
Ha e kopantsoe le phofo ea lejoe la mokoetla la tlhaho, polyvinyl chloride, le li-stabilizers, SPC rigid core vinyl ke katleho e ncha ka ho fetisisa sebakeng sa vinyl flooring.Ka 100% e sa keneleng metsi, e teteaneng ka mokhoa o makatsang, fatše SPC e ka mamella litlhoko tsa kemiso ea hau ea letsatsi le letsatsi.
SPC flooring e fumaneha ka mefuta e mengata ea mebala le lipaterone.Ponahalo ea eona ea 'nete ea lehong e ka thetsa mang kapa mang hore a nahane hore SPC ea rona e thata ea vinyl floating ea lijo-thollo ke thepa ea' nete.
Tlhokomelo ha se bothata ho hang, lesela le tšoarellang le kalafo ea UV ka holimo li etsa hore ho be bonolo haholo ho li boloka li hloekile.Tlhokomelo e kenyelletsa feela ho hloekisa ka linako tsohle kapa ho fiela le ho mopping ka linako tse ling.Ha nako e ntse e ea, mofuta ona oa fatše o tla hana ho fela, ho phunya le ho roala, 'me o ka mamella ho pepesetsoa letsatsi ka ho toba.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4.5 limilimithara |
| Katlase (Ha ho boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.5 limilimithara.(20 Mil.) |
| Bophara | 6" (152mm.) |
| Bolelele | 48" (1220mm.) |
| Qetella | Ho roala ha UV |
| Tobetsa |  |
| Kopo | Khoebo & Bolulo |
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
