Vinyl e matla, Patenteng ea Patent Unilin Click Technology
Tlhaloso:
Ntho:JSD17
Botenya:4.0mm ~ 8.0mm
Apara Layer:0.2mm ~ 0.7mm
Katlase (Taba ea boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Customization
Mokato o thata oa mantlha oa marulelo o boetse o bitsoa SPC flooring.Lintlha tsa eona tsa u-beveled ke theknoloji ea ho tobetsa ea Unilin e nang le patente.Sekhahla sa vinyl se sa keneleng metsi se na le seaparo se ka holimo sa UV se phekotsoeng.Sena se boetse se etsa hore ho be bonolo tlhokomelo le tlhokomelo.
Thepa e tiileng ea vinyl e boetse e bitsoa SPC flooring.Lintlha tsa eona tsa u-beveled ke theknoloji ea ho tobetsa ea Unilin e nang le patente.Mehaho e thata ea vinyl e entsoe ka ho khetheha bakeng sa likamore tsa ho hlapela, likamore tsa ho hlatsoetsa liaparo, kapa sebaka sefe kapa sefe sa lehae la hau kapa khoebo eo hangata e kopanang le mongobo o mongata.Sekhahla sa vinyl se sa keneleng metsi se na le seaparo se ka holimo sa UV se phekotsoeng.Sena se boetse se etsa hore ho be bonolo tlhokomelo le tlhokomelo.Le hoja e bitsa chelete e ngata ho feta mefuta e meng, 'nete ea hore e fihla ka bophara ho tloha ho 5" ho isa ho 12" e etsa hore ho be bonolo ho koahela bokaholimo bohle ba mokatong oa hau hantle le ka mokhoa o tsitsitseng.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 5mm |
| Katlase (Ha ho boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.3 limilimithara.(12 Mil.) |
| Bophara | 6" (152mm.) |
| Bolelele | 48" (1220mm.) |
| Qetella | Ho roala ha UV |
| Tobetsa |  |
| Kopo | Khoebo & Bolulo |
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
