Paterone ea majoe e sa keneleng metsi fatše e Rigid Core Vinyl e nang le
Tlhaloso:
Ntho:TPS009-C
Botenya:4.0mm ~ 8.0mm
Wear Layer:0.2mm ~ 0.7mm
Katlase (Ka boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:12" X 24"/ 18" X 18"/ 24" X 24", Ho itloaetsa
Ka ho khetha floating ea vinyl e entsoeng ka mokhoa oa majoe, o ka natefeloa ke botle ba thepa e kang letlapa, e hapiloeng ka boqhetseke ka holim'a lejoe la vinyl.Kamore efe kapa efe ea lehae la hau e lokile, leha e le tlas'a sephethephethe se phahameng, mongobo o phahameng le tšusumetso e phahameng.
E entsoe ka phofo ea lejoe la mokoetla la tlhaho, polyvinyl chloride, le li-stabilizers, SPC rigid core vinyl ke katleho e ncha ka ho fetisisa sebakeng sa vinyl flooring.Ka 100% e sa keneleng metsi, e teteaneng ka mokhoa o makatsang, fatše SPC e ka mamella litlhoko tsa kemiso ea hau ea letsatsi le letsatsi.E kenye ka phaposing efe kapa efe, esita le kichineng, likamoreng tsa ho hlapela, liphaposing tsa seretse le likamoreng tse ka tlase.Ha re pepesetsoa metsi mapolanka a rona a ke ke a ruruha, a tlamella kapa a lahleheloa ke botšepehi.
Bakeng sa mokhoa ona oa lejoe la spc flooring, TPS009-C, botenya bo ka ba 4.0/5.0/6.0 mm kapa bo hlophisitsoeng, boholo bo tloaelehileng ke 12'' X 24''.Le hoja e se tšesaane haholo, e thata haholo ha e bapisoa le botenya bo tšoanang ba mefuta e meng ea fatše, kahoo e ikutloa e tsitsitse ebile e tsitsitse ha u tsamaea ho eona.
Ka ho sebelisa sistimi ea ho tobetsa ea Unilin e nang le patented, e ka kenngoa ke uena 'me ea boloka litšenyehelo tsa basebetsi.Li ka behoa ka holim'a mefuta e mengata e fapaneng ea li-subfloors kapa li-flooring tse teng.Ho tobetsa feela sebakeng ho tla loka.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ka boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.2 limilimithara.(8 Mil.) |
| Bophara | 7.25" (184mm.) |
| Bolelele | 48" (1220mm.) |
| Qetella | Ho roala ha UV |
| Locking System |
|
| Kopo | Khoebo & Bolulo |
Lintlha tsa Tekheniki:
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND - Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND - Feta |
| Finyella | No 1907/2006 REACH | ND - Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND - Feta |
| PCP | BS EN 14041:2018 | ND - Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND - Feta |
Lintlha tsa ho paka:
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
