Umgangatho weVinyl ongenamanzi we-Oak Wooden SPC
Inkcazo:
Into:TYM 217
Ukutyeba:4.0mm~8.0mm
Nxiba umaleko:0.2mm~0.7mm
Ukwangaphantsi (Ukhetho):EVA / IXPE, 1.0mm ~ 2.0mm
Ubungakanani:12” X 24”/ 12” X 12”/ Ukwenza ngokwezifiso
Umgangatho weVinyl we-SPC wenziwa ngesitayile sokujonga iMarble.Njengenye yeeplanga zokungangeni manzi phakathi kwayo yonke imigangatho edumileyo kule mihla, iqhayisa ngesakhono esinamandla sokungangeni manzi esinokuthi sisetyenziswe ngokupheleleyo ngamanzi kumbindi wayo oqinileyo.Kwakhona, ngophawu lwayo lweZERO formaldehyde, iya isiba ngumgangatho odumileyo kwiindawo zokuhlala kunye nezorhwebo.
Xa sithetha ngokhetho lomgangatho ophantsi namhlanje, sinokhetho oluhle, njenge-WPC, i-Hardwood, i-LVT, kunye ne-SPC, zonke ezi ziintlobo ezidumileyo.Kodwa enye ibalasele kakhulu ngeempawu zayo ezintle kwiinkalo ezininzi.Umgangatho we-SPC, owenziwe ngomxube we-limestone kunye ne-vinyl resin, umgubo welitye yeyona nto iphambili.Yiyo loo nto ibizwa ngokuba yi-rigid core, ukusuka kwigama layo unokwazi ukuba inondoqo owomeleleyo njengeplanga, okwangoku inokuba yi-100% engenamanzi xa isetyenziswa ngamanzi, ayinangxaki namanzi xa ithelekiswa nezinye iindidi, oku akunakuthumela umbuzo. kuwe ke ukhethe uhlobo lomgangatho, kungakhathaliseki ukuba yeyokuhlala okanye yokusetyenziswa kwezorhwebo, akukho mathandabuzo indlela ejongene ngayo namanzi ihlala inye yezinto oza kucinga ngayo, nge-SPC flooring ungaqiniseka nge-100%.Ngokubhekiselele kwinto ebonakala ngayo, ungabeka ithemba lakho kuyo, umgangatho we-SPC unokufumaneka ngamawaka eepateni.Yithiye nje indawo yakho oyifunayo apho kufuneka uyihombise, umgangatho we-SPC uhlala unepateni enye elungileyo apho kuwe.
| Inkcazo | |
| Ubume boMphezulu | Ubume boMthi |
| Ukutyeba ngokubanzi | 4mm |
| Ukwangaphantsi (Ngokuzithandela) | IXPE/EVA(1mm/1.5mm) |
| Nxiba umaleko | 0.3mm.(12 Mil.) |
| Ububanzi | 12” (305mm.) |
| Ubude | 24” (610mm.) |
| Gqiba | Ukugquma kweUV |
| Cofa |  |
| Isicelo | EzoRhwebo kunye neNdawo yokuhlala |
| SPC IRIGID-CORE PLANK IDATHA YOBUGCISA | ||
| Ulwazi lobuGcisa | Indlela yoVavanyo | Iziphumo |
| Ubukhulu | EN427 & | Dlula |
| Ukutyeba ngokupheleleyo | EN428 & | Dlula |
| Ukutyeba kweeleya zokunxiba | EN429 & | Dlula |
| Uzinzo lweDimensional | IOS 23999: 2018 & ASTM F2199-18 | Umkhombandlela wokuVeliswa ≤0.02% (82oC @ 6hrs) |
| Umkhombandlela wokuVeliswa kuwo wonke ≤0.03% (82oC @ 6hrs) | ||
| Ukugoqa (mm) | IOS 23999: 2018 & ASTM F2199-18 | Ixabiso 0.16mm(82oC @ 6hrs) |
| Amandla ePeel (N/25mm) | I-ASTM D903-98(2017) | Umkhombandlela wokuVeliswa 62 (uMndilili) |
| Umkhombandlela wokuVeliswa kuwo wonke 63 (uMndilili) | ||
| Umthwalo omileyo | I-ASTM F970-17 | iNtsalela yoHlengahlengiso:0.01mm |
| Intsalela yokuLandelwa | I-ASTM F1914-17 | Dlula |
| Ukunyangwa kwemikrwelo | ISO 1518-1: 2011 | Akukho yangena ingubo kumthwalo 20N |
| Amandla okutshixa(kN/m) | ISO 24334:2014 | Umkhombandlela wokuVelisa 4.9 kN/m |
| Kwimiba yoMveliso engaphaya kwe-3.1 kN/m | ||
| UkuKhawuleza koMbala ukuya kuKhanya | ISO 4892-3:2016 Umjikelo 1 & ISO105–A05:1993/Cor.2:2005&ASTM D2244-16 | ≥ 6 |
| Ukusabela kumlilo | BS EN14041:2018 Isiqendu 4.1 & EN 13501-1:2018 | I-Bfl-S1 |
| I-ASTM E648-17a | Iklasi yoku-1 | |
| I-ASTM E 84-18b | Iklasi A | |
| Ukukhutshwa kwe-VOC | I-BS EN 14041: 2018 | ND – Ukudlula |
| I-ROHS / Isinyithi esinzima | EN 71-3: 2013 + A3: 2018 | ND – Ukudlula |
| Fikelela | Hayi 1907/2006 FIKELELA | ND – Ukudlula |
| Ukukhutshwa kwe-formaldehyde | BS EN14041:2018 | Iklasi: E1 |
| Uvavanyo lwePhthalate | I-BS EN 14041: 2018 | ND – Ukudlula |
| PCP | I-BS EN 14041: 2018 | ND – Ukudlula |
| Ukufuduka kwezinto ezithile | EN 71 – 3:2013 | ND – Ukudlula |
| Ulwazi lokuPakisha(4.0mm) | |
| IiPC/ctn | 12 |
| Ubunzima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Ubunzima(KG)/GW | 24500 |
