Kulula ukugcina i-Rigid Core SPC Vinyl Click Flooring
Incazelo:
Ingxenye #:TPS007-B
Ubukhulu:4.0mm ~ 8.0mm
Isendlalelo sokugqoka:0.2mm ~ 0.7mm
I-underlay (Ongakukhetha):EVA/IXPE, 1.0mm~2.0mm
Usayizi:12” X 24”/ 18” X 18”/ 24” X 24”, Ukwenza ngokwezifiso
I-Rigid core vinyl flooring isihambe indlela ende kusukela ekuqaleni kwayo okuphansi njengendlela engabizi kakhulu kunezitezi zokhuni eziqinile zendabuko.Into eyodwa engakashintshi ukukwazi ukuthengeka - kodwa ikhwalithi idlula ophahleni!Izitezi zethu ze-vinyl zinokubukeka kokhuni lwangempela kanye nokuthungwa okulula ukukufaka futhi kulula nakakhulu ukuzinakekela.
Yenziwe ngekhwalithi ephezulu, ukuvikelwa kwemvelo nokuphepha.I-TopJoy wood grain floor, i-TPS007-B, ikulethela umuzwa onethezeke kakhudlwana ekhaya lakho ngokuthungwa nombala wayo wemvelo.
Iwukuhuzuka okuqinile nokumelana nokuklwebheka, okungamukela kalula imihuzuko ehlukahlukene njengemilenze yetafula, izihlalo, izidladla zezilwane ezifuywayo, njll. ngaphandle kokulimaza phansi.
Ngaphezu kwalokho, ukufakwa kwe-SPC flooring nakho kuyashesha kakhulu.Ayidingi i-subfloor prep, asikho isikhathi se-acclimation, futhi ingafakwa phezu kwezindawo eziqinile ezikhona njengokhonkolo, i-ceramic tile endala, izinkuni noma i-vinyl flooring engekho.
Uma ufuna indawo ehlala isikhathi eside, ehlala isikhathi eside futhi engenamanzi ethuthukisa ukubukeka kwanoma iyiphi indawo futhi engeke iphule ibhange, thumela umbuzo MANJE.
| Ukucaciswa | |
| Ukwakheka Kobuso | Ukwakheka Kwezinkuni |
| Ubukhulu Sebonke | 4mm |
| I-underlay (Ongakukhetha) | I-IXPE/EVA(1mm/1.5mm) |
| Gqoka Isendlalelo | 0.2mm.(8 Mil.) |
| Ububanzi | 7.25" (184mm.) |
| Ubude | 48" (1220mm.) |
| Qeda | I-UV Coating |
| Uhlelo lokukhiya |
|
| Isicelo | Ezohwebo Nezindawo Zokuhlala |
Idatha Yezobuchwepheshe:
| IDATHA YOBUCHWEPHESHE YE-SPC RIGID-CORE PLANK | ||
| Ulwazi Lobuchwepheshe | Indlela Yokuhlola | Imiphumela |
| I-Dimensional | I-EN427 & | Dlula |
| Ubukhulu ngokuphelele | I-EN428 & | Dlula |
| Ubukhulu bezendlalelo zokugqoka | I-EN429 & | Dlula |
| Ukuzinza kweDimensional | I-IOS 23999:2018 ne-ASTM F2199-18 | Izikhombisi-ndlela Zokukhiqiza ≤0.02% (82oC @ 6hrs) |
| Kuzo zonke izikhombisi-ndlela zokukhiqiza ≤0.03% (82oC @ 6hrs) | ||
| Ukugoqa (mm) | I-IOS 23999:2018 ne-ASTM F2199-18 | Ivelu 0.16mm(82oC @ 6hrs) |
| Amandla Ekhasi (N/25mm) | I-ASTM D903-98(2017) | I-Manufacturing Direction 62 (Isilinganiso) |
| I-Direct Manufacture Direction 63 (Isilinganiso) | ||
| I-Static Load | I-ASTM F970-17 | Ukuhlehliswa Okusele:0.01mm |
| Ukuhlehliswa Kwezinsalela | I-ASTM F1914-17 | Dlula |
| I-Scratch Resistance | ISO 1518-1:2011 | Akukho kungene i-coating ekulayisheni okungu-20N |
| Amandla Okukhiya(kN/m) | ISO 24334:2014 | Isikhombisi-ndlela Sokukhiqiza 4.9 kN/m |
| Kuzo zonke izikhombisi-ndlela Zokukhiqiza 3.1 kN/m | ||
| Ukushesha Kombala Ekukhanyeni | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005&ASTM D2244-16 | ≥ 6 |
| Ukusabela emlilweni | I-BS EN14041:2018 Isigaba somthetho 4.1 & EN 13501-1:2018 | I-Bfl-S1 |
| I-ASTM E648-17a | Ikilasi 1 | |
| I-ASTM E 84-18b | Ikilasi A | |
| Ukukhishwa kwe-VOC | I-BS EN 14041:2018 | ND - Dlula |
| I-ROHS/Insimbi Enzima | EN 71-3:2013+A3:2018 | ND - Dlula |
| Finyelela | No 1907/2006 REACH | ND - Dlula |
| Ukukhishwa kwe-formaldehyde | I-BS EN14041:2018 | Ikilasi: E1 |
| Ukuhlolwa kwe-Phthalate | I-BS EN 14041:2018 | ND - Dlula |
| I-PCP | I-BS EN 14041:2018 | ND - Dlula |
| Ukufuduka Kwezinto Ezithize | EN 71 – 3:2013 | ND - Dlula |
Ukupakisha Ulwazi:
| Ulwazi Lokupakisha(4.0mm) | |
| Ama-PC/ctn | 12 |
| Isisindo(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Isisindo(KG)/GW | 24500 |
