I-LVT Flooring Chofoza i-SPC Rigid Core Flooring
Incazelo:
Into:JSD31
Ubukhulu:4.0mm ~ 8.0mm
Gqoka Isendlalelo:0.2mm ~ 0.7mm
I-Underlay(Ongakukhetha):EVA/IXPE, 1.0mm~2.0mm
Usayizi:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Ukwenza ngokwezifiso
I-SPC Flooring Planks izokukhuthaza ngokuphathelene nemvelo nokuphila okunempilo, imahhala engu-100% ye-formaldehyde kanye ne-VOC.I-Superior scuff kanye nokhuni olungokoqobo lubukeka.Inqubo ye-embossing idala ukuthungwa kwezinkuni zangempela.
Uma kuqhathaniswa ne-flooring yendabuko efana ne-Luxury Vinyl Tile, i-WPC, i-hardwood flooring, inzuzo enkulu ye-SPC Rigid Core Flooring ukuqina okungenakuqhathaniswa, ukuthengeka kanye no-100% ongenamanzi.
Uhlu olubanzi lwezinketho lungcono kulabo abafuna ukukwazi ukwenza ngokwezifiso ukubukeka kwekhaya labo.Ingafakwa ezindaweni zekhaya njengamagumbi okuwasha, izindlu zangasese, amagumbi angaphansi, namakhishi.Isici esingangeni manzi futhi senza leli bhodi lizinze kakhulu ezindaweni lapho umswakama nezinga lokushisa lingashintshashintsha.
Sinikezwe ilayisense yinkampani ye-Unilin, sisebenzisa umshini wokuqhafaza we-HOMAG waseJalimane ukuze siqinisekise ukunemba kokucubungula kwesistimu yokuchofoza okuhlanganisiwe.I-DIY-friendly, ungakwazi ukusika usayizi ngommese womsebenzi futhi uzifakele ngokwakho.
| Ukucaciswa | |
| Ukwakheka Kobuso | Ukwakheka Kwezinkuni |
| Ubukhulu Sebonke | 4.5mm |
| I-underlay(Uma uthanda) | I-IXPE/EVA(1mm/1.5mm) |
| Gqoka Isendlalelo | 0.5mm.(20 Mil.) |
| Ububanzi | 6" (152mm.) |
| Ubude | 48" (1220mm.) |
| Qeda | I-UV Coating |
| Chofoza |  |
| Isicelo | Ezohwebo Nezindawo Zokuhlala |
| IDATHA YOBUCHWEPHESHE YE-SPC RIGID-CORE PLANK | ||
| Ulwazi Lobuchwepheshe | Indlela Yokuhlola | Imiphumela |
| I-Dimensional | I-EN427 & | Dlula |
| Ubukhulu ngokuphelele | I-EN428 & | Dlula |
| Ubukhulu bezendlalelo zokugqoka | I-EN429 & | Dlula |
| Ukuzinza kweDimensional | I-IOS 23999:2018 ne-ASTM F2199-18 | Izikhombisi-ndlela Zokukhiqiza ≤0.02% (82oC @ 6hrs) |
| Kuzo zonke izikhombisi-ndlela zokukhiqiza ≤0.03% (82oC @ 6hrs) | ||
| Ukugoqa (mm) | I-IOS 23999:2018 ne-ASTM F2199-18 | Ivelu 0.16mm(82oC @ 6hrs) |
| Amandla Ekhasi (N/25mm) | I-ASTM D903-98(2017) | I-Manufacturing Direction 62 (Isilinganiso) |
| I-Direct Manufacture Direction 63 (Isilinganiso) | ||
| I-Static Load | I-ASTM F970-17 | Ukuhlehliswa Okusele:0.01mm |
| Ukuhlehliswa Kwezinsalela | I-ASTM F1914-17 | Dlula |
| I-Scratch Resistance | ISO 1518-1:2011 | Akukho kungene i-coating ekulayisheni okungu-20N |
| Amandla Okukhiya(kN/m) | ISO 24334:2014 | Isikhombisi-ndlela Sokukhiqiza 4.9 kN/m |
| Kuzo zonke izikhombisi-ndlela Zokukhiqiza 3.1 kN/m | ||
| Ukushesha Kombala Ekukhanyeni | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005&ASTM D2244-16 | ≥ 6 |
| Ukusabela emlilweni | I-BS EN14041:2018 Isigaba somthetho 4.1 & EN 13501-1:2018 | I-Bfl-S1 |
| I-ASTM E648-17a | Ikilasi 1 | |
| I-ASTM E 84-18b | Ikilasi A | |
| Ukukhishwa kwe-VOC | I-BS EN 14041:2018 | ND - Dlula |
| I-ROHS/Insimbi Enzima | EN 71-3:2013+A3:2018 | ND - Dlula |
| Finyelela | No 1907/2006 REACH | ND - Dlula |
| Ukukhishwa kwe-formaldehyde | I-BS EN14041:2018 | Ikilasi: E1 |
| Ukuhlolwa kwe-Phthalate | I-BS EN 14041:2018 | ND - Dlula |
| I-PCP | I-BS EN 14041:2018 | ND - Dlula |
| Ukufuduka Kwezinto Ezithize | EN 71 – 3:2013 | ND - Dlula |
| Ulwazi Lokupakisha(4.0mm) | |
| Ama-PC/ctn | 12 |
| Isisindo(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Isisindo(KG)/GW | 24500 |
