Injiniya na alatu vinyl bene don aikace-aikacen gida da na kasuwanci
Bayani:
Abu:Saukewa: TJ1022-KB15
Kauri:4.0mm ~ 8.0mm
Saka Layer:0.2mm ~ 0.7mm
Ƙarƙashin ƙasa (Na zaɓi):EVA / IXPE, 1.0mm ~ 2.0mm
Girman:7.25''X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Daidaitawa
Samun karɓuwa tare da ci-gaba fasahar, injiniyoyin shimfidar bene na vinyl na alatu da kyau suna kwaikwayon itacen dabi'a a ƙaramin farashi.
Yana da 100% mai hana ruwa, mai sauƙin shigarwa, iska mai tsabta don tsaftacewa kuma yana ɗaukar ƙaƙƙarfan buƙatun gida tare da salo da ƙarfi.
Idan kuna neman kyawawan shimfidar bene na halitta wanda zai iya jure danshi, gwada TopJoy Engineered alatu vinyl dabe.
Injiniyan kayan alatu na vinyl, wanda kuma aka sani da shimfidar bene na SPC, shine zaɓin shimfidar bene na vinyl mai dorewa a kasuwa.
An keɓance shi da sauran nau'ikan shimfidar bene na vinyl ta keɓaɓɓen Layer ɗin sa mai jujjuyawa, wanda ke ba da tushe mai ƙarfi mai ƙarfi da 100% mai hana ruwa ga kowane katako na bene.
Injiniya kayan alatu na vinyl yana samuwa a cikin launuka masu yawa da alamu.Wasu daga cikin salon an ƙera su don kama da katako, tayal, ko wasu nau'ikan bene.Haƙiƙanin kallon itace na iya yaudarar kowa don tunanin shimfidar bene na SPC ɗinmu a ƙarshen ƙwayar itace shine kayan gaske.
Our wuya vinyl surface yana amfani da wani lamban kira lamba dabara dabara.Babu ilimi na musamman ko horo da ake buƙata.Yawancin masu gida suna godiya cewa benayen SPC suna da sauƙin shigarwa.Ana iya sanya su a saman nau'ikan bene na ƙasa daban-daban ko kuma shimfidar bene na yanzu.Kawai danna cikin wurin zai zama OK, kawar da buƙatar manne da rikitarwa.
| Ƙayyadaddun bayanai | |
| Surface Texture | Itace Texture |
| Gabaɗaya Kauri | 4mm ku |
| Underlay (Na zaɓi) | IXPE/EVA(1mm/1.5mm) |
| Saka Layer | 0.2mm.(mil 8) |
| Nisa | 7.25" (184mm) |
| Tsawon | 48" (1220mm.) |
| Gama | Rufin UV |
| Tsarin Kulle |
|
| Aikace-aikace | Kasuwanci & Gidan zama |
Bayanan Fasaha:
| SPC RIGID-CORE PLANK TECHNICAL DATA | ||
| Bayanin Fasaha | Hanyar Gwaji | Sakamako |
| Girma | EN427 | Wuce |
| Kauri a duka | EN428 | Wuce |
| Kauri na lalacewa yadudduka | EN429 | Wuce |
| Girman Kwanciyar hankali | IOS 23999: 2018 & ASTM F2199-18 | Jagoran Masana'antu ≤0.02% (82oC @ 6hrs) |
| Gaba ɗaya Jagoran Kera ≤0.03% (82oC @ 6hrs) | ||
| Curling (mm) | IOS 23999: 2018 & ASTM F2199-18 | Darajar 0.16mm(82oC @ 6hrs) |
| Ƙarfin Kwasfa (N/25mm) | ASTM D903-98 (2017) | Hanyar Masana'antu 62 (Matsakaici) |
| Tsallake Hanyar Kera 63 (Matsakaici) | ||
| Load a tsaye | Saukewa: ASTM F970-17 | Ragowar Shiga:0.01mm |
| Ragowar Shiga | Saukewa: ASTM F1914-17 | Wuce |
| Resistance Scratch | ISO 1518-1: 2011 | Babu shiga cikin shafi a nauyin 20N |
| Ƙarfin Kulle (kN/m) | ISO 24334: 2014 | Jagoran Masana'antu 4.9 kN/m |
| Ko'ina Jagoran Masana'antu 3.1 kN/m | ||
| Saurin Launi zuwa Haske | ISO 4892-3: 2016 Zagayowar 1 & ISO105–A05:1993/Kor.2:2005& ASTM D2244-16 | ≥ 6 |
| Martani ga wuta | TS EN 14041: 2018 Sashe na 4.1 & EN 13501-1: 2018 | Bfl-S1 |
| ASTM E648-17A | Darasi na 1 | |
| ASTM E84-18b | Darasi A | |
| Fitowar VOC | TS EN 14041: 2018 | ND - Wuce |
| ROHS/Heavy Metal | EN 71-3:2013+A3:2018 | ND - Wuce |
| Isa | A'a 1907/2006 GASKIYA | ND - Wuce |
| Formaldehyde watsi | TS EN 14041: 2018 | Darasi: E1 |
| Gwajin Phthalate | TS EN 14041: 2018 | ND - Wuce |
| PCP | TS EN 14041: 2018 | ND - Wuce |
| Hijira na Wasu Abubuwa | EN 71 – 3:2013 | ND - Wuce |
Bayanin tattarawa:
| Bayanin tattarawa (4.0mm) | |
| PC/ctn | 12 |
| Nauyi(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Nauyi(KG)/GW | 24500 |
