Dabaqa vinyl ee raaxada oo injineero ah oo loogu talagalay codsiga deegaanka iyo ganacsiga labadaba
Sharaxaad:
Shayga:TJ1022-KB15
Dhumucda:4.0mm ~ 8.0mm
Lakabka xidho:0.2mm ~ 0.7mm
Underlay (Ikhtiyaar ah):EVA/ IXPE, 1.0mm ~ 2.0mm
Cabbirka：7.25''X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Habaynta
Iyadoo lagu qaatay tignoolajiyada horumarsan, sagxadaha vinyl ee raaxada ee la farsameeyay ayaa si qurux badan ugu ekaysiiyay alwaax dabiici ah oo qiimo jaban ah.
Waa 100% biyuhu-mareen, fududahay in la rakibo, neecow si loo nadiifiyo oo ay u maareyso baahiyaha qoyska ee qallafsan oo qaab iyo xoog leh.
Haddii aad raadinayso xoogaa qurux badan, muuqaal dabiici ah oo u adkeysan kara qoyaanka, isku day TopJoy Engineered sagxadda vinyl ee raaxada.
Sagxadaha vinyl ee raaxada ee injineernimada, oo sidoo kale loo yaqaan sagxadaha SPC, ayaa ah ikhtiyaarka sagxadaha vinyl-ka ee aan biyuhu ugu adkaysan karin ee suuqa.
Waxay ka duwan tahay noocyada kale ee sagxadaha vinyl iyada oo loo eegayo lakabkeeda udub-dhexaadka ah ee u adkaysta, kaas oo siinaya saldhig aad u deggan iyo 100% biyuhu aanay u lahayn loox kasta oo sagxadda.
Dabaqa vinyl ee raaxada ee injineerka ah ayaa lagu heli karaa midabyo iyo qaabab kala duwan.Qaar ka mid ah qaababka waxaa loogu talagalay inay u ekaadaan alwaax adag, foorno, ama noocyo kale oo sagxadaha.Muuqaal alwaax ah oo macquul ah ayaa qof walba ku khiyaami kara inuu u maleeyo in sagxaddayada SPC ee ku jirta hadhuudhka alwaax ay tahay alaabta dhabta ah.
Dushayada vinyl ee adag waxay isticmaashaa farsamada rakibaadda patent-ka.Aqoon gaar ah ama tababar looma baahna.Milkiilayaal badan ayaa qadarin in sagxadaha SPC ay fududahay in la rakibo.Waxaa lagu dul dhejin karaa noocyo badan oo kala duwan oo dabaqyo hoose ah ama sagxadaha jira.Kaliya dhagsii meesha waa OK, taas oo meesha ka saaraysa baahida xabagyada qasan iyo kuwa murugsan.
| Tilmaamid | |
| Dusha Texture | Qoryaha Qoryaha |
| Dhumucda guud | 4mm |
| Underlay (Ikhtiyaar ah) | IXPE/EVA(1mm/1.5mm) |
| Lakabka xidho | 0.2mm(8 milyan) |
| Ballaca | 7.25" (184mm.) |
| Dhererka | 48" (1220mm.) |
| dhame | Dahaarka UV |
| Nidaamka Qufulka |
|
| Codsiga | Ganacsiga & Deegaanka |
Xogta Farsamada
| SPC RIGID-CORE XOGTA TECHNICAL PLANK | ||
| Macluumaadka Farsamada | Habka Imtixaanka | Natiijooyinka |
| Cabbir | EN427 & | Gudub |
| Dhumucda guud ahaan | EN428 & | Gudub |
| Dhumucda lakabyada xidhashada | EN429 & | Gudub |
| Deganaanshaha cabbirka | IOS 23999:2018 & ASTM F2199-18 | Jihada wax soo saarka ≤0.02% (82oC @ 6saacadood) |
| Guud ahaan jihada wax-soo-saarka ≤0.03% (82oC @ 6saacadood) | ||
| Curling (mm) | IOS 23999:2018 & ASTM F2199-18 | Qiimaha 0.16mm(82oC @ 6 saacadood) |
| Xoogga diirka (N/25mm) | ASTM D903-98 (2017) | Tilmaamaha Wax-soo-saarka 62 (Celceliska) |
| Guud ahaan jihada wax-soo-saarka 63 (celcelis ahaan) | ||
| Load taagan | ASTM F970-17 | Gelida Hadhaaga:0.01mm |
| Gelitaan Hadhaaga ah | ASTM F1914-17 | Gudub |
| Iska caabinta xoqitaanka | ISO 1518-1: 2011 | Ma jiro dahaarka dhexda u saaran culeyska 20N |
| Quful Quful (kN/m) | ISO 24334:2014 | Jihada wax soo saarka 4.9 kN/m |
| Guud ahaan jihada wax-soo-saarka 3.1 kN/m | ||
| Midabka Xajmiga Iftiinka | ISO 4892-3:2016 Wareega 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥ 6 |
| Falcelinta dabka | TS EN14041: 2018 Farqada 4.1 & EN 13501-1: 2018 | Bfl-S1 |
| ASTM E648-17a | Fasalka 1 | |
| ASTM E 84-18b | Fasalka A | |
| Soosaarka VOC | BS EN 14041:2018 | ND - Gudub |
| ROHS/ Birta culus | EN 71-3:2013+A3:2018 | ND - Gudub |
| Gaadhi | Maya 1907/2006 GAAR | ND - Gudub |
| Formaldehyde sii deynta | BS EN14041:2018 | Fasalka: E 1 |
| Imtixaanka Phthalate | BS EN 14041:2018 | ND - Gudub |
| PCP | BS EN 14041:2018 | ND - Gudub |
| Socdaalka Qaybaha Qaar | EN 71 - 3:2013 | ND - Gudub |
Macluumaadka Xirmada:
| Macluumaadka Xirmada (4.0mm) | |
| Kumbuyuutar/ctn | 12 |
| Miisaanka(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Miisaanka (KG)/GW | 24500 |
