Mai hana ruwa Multi Launuka Masana'antu Rigid Core dabe
Bayani:
Abu:JSD51
Kauri:4.0mm ~ 8.0mm
Saka Layer:0.2mm ~ 0.7mm
Ƙarƙashin ƙasa(Na zaɓi):EVA / IXPE, 1.0mm ~ 2.0mm
Girman:7.25''X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Daidaitawa
TopJoy rustic itace rubutun vinyl bene an tsara shi tare da launuka: Grey da Taupe.Ana amfani da wannan salon da kyau a wasu wuraren cin abinci na musamman, wuraren kasuwanci ko wani wurin zama na fasaha.Amfanin wannan sautunan da yawa da manyan bambance-bambancen launuka shine abokantaka na ƙura, wanda baya buƙatar tsaftacewa akai-akai.
Idan kuna neman shimfidar bene mai salo na ƙarancin farashi, gwada shimfidar bene na vinyl na SPC.
Yanzu shine mafi shaharar bene a kasuwa tare da kyakkyawan itace ko ƙirar tayal.Za'a iya amfani da bene mai ƙarfi na SPC a cikin saitunan zama da na kasuwanci.
JSD51 ya zo a cikin katako na vinyl na alatu tare da hatsin itace na halitta.Tsakanin sun yi kama da katako na injiniya da gaske fiye da shimfidar laminate.A gaskiya ma, yawancin abokan ciniki ba su ma gane cewa suna kallon vinyl lokacin da suka ga samfurin ba - wannan shine yadda yake kama da gaske.
SPC bene yana da ɗorewa, karce da tabo saboda godiya ga ƙaƙƙarfan tushe, yana sa kiyayewa da tsaftace iska.Kuna iya amfani da mop mai ɗanɗano cikin sauƙi don cire ƙura da datti daga benayen ku.Tare da lokacin haɓaka sifili da tsarin shigarwa mai sauƙi, zaku iya samun kyakkyawa, shimfidar shimfidar yanayi mai hana ruwa a cikin ɗan lokaci!
| Ƙayyadaddun bayanai | |
| Surface Texture | Itace Texture |
| Gabaɗaya Kauri | 5.5mm |
| Ƙarƙashin ƙasa (Na zaɓi) | IXPE/EVA(1mm/1.5mm) |
| Saka Layer | 0.3mm ku.(12 Mil.) |
| Nisa | 7.25" (184mm) |
| Tsawon | 36" (914mm.) |
| Gama | Rufin UV |
| Danna |  |
| Aikace-aikace | Kasuwanci & Gidan zama |
| SPC RIGID-CORE PLANK TECHNICAL DATA | ||
| Bayanin Fasaha | Hanyar Gwaji | Sakamako |
| Girma | EN427 | Wuce |
| Kauri a duka | EN428 | Wuce |
| Kauri na lalacewa yadudduka | EN429 | Wuce |
| Girman Kwanciyar hankali | IOS 23999: 2018 & ASTM F2199-18 | Jagoran Masana'antu ≤0.02% (82oC @ 6hrs) |
| Gaba ɗaya Jagoran Kera ≤0.03% (82oC @ 6hrs) | ||
| Curling (mm) | IOS 23999: 2018 & ASTM F2199-18 | Darajar 0.16mm(82oC @ 6hrs) |
| Ƙarfin Kwasfa (N/25mm) | ASTM D903-98 (2017) | Hanyar Masana'antu 62 (Matsakaici) |
| Tsallake Hanyar Kera 63 (Matsakaici) | ||
| Load a tsaye | Saukewa: ASTM F970-17 | Ragowar Shiga:0.01mm |
| Ragowar Shiga | Saukewa: ASTM F1914-17 | Wuce |
| Resistance Scratch | ISO 1518-1: 2011 | Babu shiga cikin shafi a nauyin 20N |
| Ƙarfin Kulle (kN/m) | ISO 24334: 2014 | Jagoran Masana'antu 4.9 kN/m |
| Ko'ina Jagoran Masana'antu 3.1 kN/m | ||
| Saurin Launi zuwa Haske | ISO 4892-3: 2016 Zagayowar 1 & ISO105–A05:1993/Kor.2:2005& ASTM D2244-16 | ≥ 6 |
| Martani ga wuta | TS EN 14041: 2018 Sashe na 4.1 & EN 13501-1: 2018 | Bfl-S1 |
| ASTM E648-17A | Darasi na 1 | |
| ASTM E84-18b | Darasi A | |
| Fitowar VOC | TS EN 14041: 2018 | ND - Shiga |
| ROHS/Heavy Metal | EN 71-3:2013+A3:2018 | ND - Shiga |
| Isa | A'a 1907/2006 GASKIYA | ND - Shiga |
| Formaldehyde watsi | TS EN 14041: 2018 | Darasi: E1 |
| Gwajin Phthalate | TS EN 14041: 2018 | ND - Shiga |
| PCP | TS EN 14041: 2018 | ND - Shiga |
| Hijira na Wasu Abubuwa | EN 71 – 3:2013 | ND - Shiga |
| Bayanin tattarawa (4.0mm) | |
| PC/ctn | 12 |
| Nauyi(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Nauyi(KG)/GW | 24500 |
