Metsi a sa keneleng Metsi a Multi Colors Industrial Rigid Core flooring
Tlhaloso:
Ntho:JSD51
Botenya:4.0mm ~ 8.0mm
Apara Layer:0.2mm ~ 0.7mm
Katlase (Taba ea boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Customization
TopJoy rustic wood texture floor vinyl floor e entsoe ka mebala: Gray le Taupe.Mokhoa ona o sebelisoa hantle lireschorenteng tse ling tse ikhethileng, libakeng tsa khoebo kapa sebakeng se seng sa bolulo sa bonono.Melemo ea mefuta ena e mengata ea mebala le mebala e fapaneng e fapaneng ke lerōle, e sa hlokeng ho hloekisoa khafetsa.
Haeba u batla fatše setaele ka theko e tlase, leka rona SPC vinyl flooring.
Hona joale ke sebaka sa fatše se tummeng ka ho fetisisa 'marakeng se nang le lehong le letle la sebele kapa mohlala oa lithaele.SPC rigid core flooring e ka sebelisoa libakeng tsa bolulo le tsa khoebo.
JSD51 e tla ka mapolanka a majabajaba a vinyl a nang le lijo-thollo tsa lehong la tlhaho.Mapolanka a shebahala joalo ka lehong le thata le entsoeng ka thata ho feta lesela la laminate.Ha e le hantle, bareki ba bangata ha ba elelloe hore ba shebile vinyl ha ba bona sehlahisoa - ke kamoo se shebahalang kateng.
SPC fatše e tšoarella nako e telele, ha ho mengoane ebile ha e na matheba ka lebaka la lera le tiileng la mantlha, e etsang ho boloka le ho hloekisa moea.U ka sebelisa mopo o mongobo habonolo ho tlosa lerōle le litšila fatše.Ka nako ea zero acclimation le sistimi e bonolo ea ho kenya, o ka ba le fuluru e ntle, ea tlhaho e sa keneleng metsi ka nako!
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 5.5 limilimithara |
| Katlase (Ha ho boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.3 limilimithara.(12 Mil.) |
| Bophara | 7.25" (184mm.) |
| Bolelele | 36" (914mm.) |
| Qetella | Ho roala ha UV |
| Tobetsa |  |
| Kopo | Khoebo & Bolulo |
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
