Mpaghara Azụmahịa na-adịgide adịgide n'elu ihe OEM na-ebubata
Nkọwa:
Ihe:BSA 12
Ọkpụrụkpụ:4.0mm ~ 8.0mm
Yiri oyi akwa:0.2mm ~ 0.7mm
N'okpuru ala (Nhọrọ):EVA / IXPE, 1.0mm ~ 2.0mm
Nha:7.25''X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ nhazi
Dị ka ala kwesịrị ekwesị maka mpaghara azụmahịa, TopJoy SPC flooring nwere ike ịrụ ọrụ nke ọma na nnukwu okporo ụzọ na ebe ọrụ ọtụtụ ọrụ.Na elu àgwà nke underlay, TopJoy flooring nwere ike ibelata mkpọtụ mgbe ndị mmadụ na-eje ije na ya.Na akwa akwa akwa na ala na-ekwe nkwa ndụ ogologo ndụ maka ala anyị.
Emebere ala ụlọ vinyl siri ike maka ntọala azụmahịa n'ihi ịdịte aka ya.Otú ọ dị, ndị nwe ụlọ na-eji nwayọọ nwayọọ na-anabata elu elu siri ike nke oge a n'ihi ọtụtụ uru ya.Ọ nwere nhọrọ sara mbara nke ezigbo osisi na ọdịdị nkume, ma ọ dị ọnụ ahịa, dị mfe ịwụnye na enyi na gburugburu ebe obibi.
Gụnyere nkume nzu, ala SPC nwere njupụta dị elu ma e jiri ya tụnyere WPC.Njupụta ya dị elu na-enye nkwụsi ike ka mma site na ncha ma ọ bụ nkwụsị site na ihe ndị dị arọ nke a na-etinye n'elu ya ma na-eme ka ọ ghara ịdị na-agbasawanye ma ọ bụ nkwụsịtụ n'ọnọdụ mgbanwe okpomọkụ dị ukwuu.
Iji belata mkpọtụ mgbe ị na-eje ije, anyị na-enye ihe ejikọtara nke ọma dị ka IXPE na SPC.SPC hard core elu nke nwere ihe dị n'okpuru ebe a dị mma maka ntọala ebe mbelata mkpọtụ dị mkpa dị ka ụlọ akwụkwọ, ụlọ ọrụ ma ọ bụ ụfọdụ oghere n'ime ụlọ.
Ala ụlọ vinyl siri ike dịkwa mma maka ezinụlọ nwere ụmụ nwanyị dị ime ma ọ bụ ụmụaka, n'ihi na ọ dị mma gburugburu ebe obibi yana formaldehyde n'efu dabere na ule ndị otu ndị ọzọ mere.
Site na uru ndị a niile, elu a siri ike dị ọnụ ala karịa osisi ma ọ bụ nkume ala.Gịnị kpatara na ị gaghị etinye iwu gị ugbu a?!
| Nkọwapụta | |
| Ọdịdị dị n'elu | Osisi Texture |
| N'ozuzu oke | 4mm |
| N'okpuru ala (nhọrọ) | IXPE/EVA (1mm/1.5mm) |
| Yiri oyi akwa | 0.3mm.(Mill 12) |
| Obosara | 7.25" (184mm.) |
| Ogologo | 48" (1220mm.) |
| Mechaa | mkpuchi UV |
| Pịa |  |
| Ngwa | Azụmahịa & Ebe obibi |
| SPC RIGID-CORE PLANK data teknụzụ | ||
| Ozi nka | Usoro ule | Nsonaazụ |
| Akụkụ | EN427 & | Gafe |
| Ọkpụrụkpụ na mkpokọta | EN428 & | Gafe |
| Ọkpụrụkpụ nke akwa akwa akwa | EN429 & | Gafe |
| Nkwụsi ike akụkụ | IOS 23999: 2018 & ASTM F2199-18 | Ntuziaka nrụpụta ≤0.02% (82oC @ 6hrs) |
| N'ofe ntụzịaka nrụpụta ≤0.03% (82oC @ 6hrs) | ||
| Curling (mm) | IOS 23999: 2018 & ASTM F2199-18 | Uru 0.16mm(82oC @ 6hrs) |
| Ike bee (N/25mm) | ASTM D903-98 (2017) | Ntuziaka nrụpụta 62 (Ọkara) |
| N'ofe ntụzịaka nrụpụta 63 (nkezi) | ||
| Ibu static | ASTM F970-17 | Mwepụta ihe fọdụrụ: 0.01mm |
| Ntinye ihe fọdụrụ | ASTM F1914-17 | Gafe |
| Nguzogide cratch | ISO 1518-1: 2011 | Ọ dịghị banye n'ime mkpuchi na ibu nke 20N |
| Ike mkpọchi (kN/m) | ISO 24334:2014 | Ntuziaka nrụpụta 4.9 kN/m |
| N'ofe ntuziaka nrụpụta 3.1 kN/m | ||
| Agba ngwa ngwa gaa na Ìhè | ISO 4892-3: 2016 okirikiri 1 & ISO105–A05:1993/Kọr.2:2005& ASTM D2244-16 | ≥ 6 |
| Mmeghachi omume ọkụ | BS EN14041: 2018 Nkeji edemede 4.1 & EN 13501-1: 2018 | Bfl-S1 |
| ASTM E648-17A | Klas 1 | |
| ASTM E 84-18b | Klas A | |
| Mgbapụta VOC | BS EN 14041:2018 | ND - Gafe |
| ROHS/Heavy Metal | EN 71-3:2013+A3:2018 | ND - Gafe |
| iru | Mba 1907/2006 rute | ND - Gafe |
| Formaldehyde mmepụta | BS EN14041:2018 | Klas: E1 |
| Ule Phthalate | BS EN 14041:2018 | ND - Gafe |
| PCP | BS EN 14041:2018 | ND - Gafe |
| Mbugharị nke ụfọdụ ihe | EN 71 – 3:2013 | ND - Gafe |
| Ozi mbukota (4.0mm) | |
| PC/ctn | 12 |
| Ibu(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Ibu(KG)/GW | 24500 |
