Rigid Core SPC Vinyl Dinani Pansi
Kufotokozera:
Katunduyo:Chithunzi cha TJ8866L-BR05
Makulidwe:4.0mm ~ 8.0mm
Valani Gulu:0.2mm ~ 0.7mm
Kuyika pansi (Zosankha):EVA / IXPE, 1.0mm ~ 2.0mm
Kukula:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Kusintha Mwamakonda Anu
Pansi pazitsulo zolimba za vinyl zafika patali kuyambira pomwe adayambira modzichepetsa ngati njira yotsika mtengo poyerekeza ndi matabwa achikhalidwe.Chinthu chimodzi chomwe sichinasinthe ndi kukwanitsa - koma khalidweli ndi kudzera padenga!Pansi pa vinyl yathu imakhala ndi mawonekedwe enieni a matabwa omwe ndi osavuta kukhazikitsa komanso osavuta kusamalira.
Zopangidwa ndi zinthu zapamwamba kwambiri, zoteteza chilengedwe komanso chitetezo.TopJoy wood grain floor, TJ8866L-BR05, imabweretsa kumverera komasuka kunyumba kwanu kudzera mu kapangidwe kake kachilengedwe ndi mtundu wake.
Kusankha pansi pa SPC kungapangitse kusiyana kwakukulu m'moyo wathu watsiku ndi tsiku:
1. Osalowa madzi.Zoyenera zipinda zonse za nyumba yanu.
2. Kumasuka kwa unsembe : Dinani dongosolo kuti zikhale zosavuta kukhazikitsa.DIY si vuto konse.
3. Kupanga : Mitundu yambirimbiri ilipo.
4. Chitetezo : Ma phthalates aulere ndi formaldehyde yaulere
5. Zosatentha ndi moto: Kalasi Bf1 (EN 13501) & Kalasi A (ASTM E84)
Ngati mukuyang'ana malo olimba, okhalitsa komanso osalowa madzi omwe amawonjezera mawonekedwe a malo aliwonse ndipo osasokoneza banki, tumizani kufunsa TSOPANO.
| Kufotokozera | |
| Maonekedwe Pamwamba | Wood Texture |
| Kunenepa Kwambiri | 4 mm |
| Kuyika pansi (Mwasankha) | IXPE/EVA(1mm/1.5mm) |
| Valani Layer | 0.2 mm.(8 Mil.) |
| M'lifupi | 7.25" (184mm.) |
| Utali | 48 "(1220mm.) |
| Malizitsani | Kupaka kwa UV |
| Locking System |
|
| Kugwiritsa ntchito | Zamalonda & Zogona |
Zambiri Zaukadaulo:
| SPC RIGID-CORE PLANK TECHNICAL DATA | ||
| Zambiri Zaukadaulo | Njira Yoyesera | Zotsatira |
| Dimensional | EN427 ndi | Pitani |
| Makulidwe onse | EN428 ndi | Pitani |
| Makulidwe a zigawo zovala | EN429 ndi | Pitani |
| Dimensional Kukhazikika | IOS 23999:2018 & ASTM F2199-18 | Mayendedwe Opanga ≤0.02% (82oC @ 6hrs) |
| Kuzungulira Pakupanga ≤0.03% (82oC @ 6hrs) | ||
| Kupindika (mm) | IOS 23999:2018 & ASTM F2199-18 | Mtengo wa 0.16mm(82oC @ 6hrs) |
| Mphamvu ya Peel (N/25mm) | ASTM D903-98(2017) | Njira Yopanga 62 (Avereji) |
| Kudutsa Njira Yopanga 63 (Avereji) | ||
| Static Load | ASTM F970-17 | Zotsalira Zolowera: 0.01mm |
| Zotsalira Zotsalira | ASTM F1914-17 | Pitani |
| Scratch Resistance | ISO 1518-1: 2011 | Palibe adalowa mu zokutira pa katundu 20N |
| Kukhoma Mphamvu(kN/m) | ISO 24334: 2014 | Njira Yopangira 4.9 kN/m |
| Kudutsa Njira Yopanga 3.1 kN/m | ||
| Mtundu Wachangu Kuwala | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥ 6 |
| Kuchita ndi moto | BS EN14041:2018 Ndime 4.1 & EN 13501-1:2018 | Bfl-S1 |
| Chithunzi cha ASTM E648-17A | Kalasi 1 | |
| Chithunzi cha ASTM E84-18b | Kalasi A | |
| Kutulutsa kwa VOC | TS EN 14041: 2018 | ND - Kupita |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND - Kupita |
| Fikirani | No 1907/2006 REACH | ND - Kupita |
| Kutulutsa kwa formaldehyde | EN 14041: 2018 | Gulu: E1 |
| Phthalate Test | TS EN 14041: 2018 | ND - Kupita |
| PCP | TS EN 14041: 2018 | ND - Kupita |
| Kusamuka kwa Zinthu Zina | EN 71 – 3:2013 | ND - Kupita |
Packing Infornation:
| Zambiri Pakulongedza (4.0mm) | |
| Ma PC/ctn | 12 |
| Kulemera (KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Kulemera (KG)/GW | 24500 |
