Sagxadda Dabaqa ee SPC ee Saxda ah
Sharaxaad:
Shayga：JSD39
Dhumucda:4.0mm ~ 8.0mm
Lakabka xidho:0.2mm ~ 0.7mm
Hoosta (Ikhtiyaari):EVA/ IXPE, 1.0mm ~ 2.0mm
Cabbirka：7.25''X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Habaynta
Kor u qaad muuqaalka xafiiskaaga ama gurigaaga oo leh TopJoy tile vinyl oo adag.
Iyada oo qaab-dhismeed alwaax ah oo macquul ah, looxyadani waxay bixiyaan muuqaal alwaax ah oo dhab ah.
Maadaama dabaqaani yahay mid aan biyuhu lahayn, waxaa lagula talinayaa isticmaalka deegaanka iyo ganacsiga labadaba.
Muqaalka Sagxada Dhabta ah ee SPC waxaa dhiirigeliyay aduunka nagu wareegsan.Qaabka jilif geedka stria oo leh muuqaal hadhuudh alwaax ah oo dhab ah ayaa si fiican u ekaysiinaya quruxda dabiiciga ah.
Midabka Blogona wuxuu keenaa ruux qurux badan waana doorasho ku habboon meelahaaga nololeed;
Ka sokow bixinta muuqaal dhab ah oo alwaax ah, looxa, sida muuqaalkayaga dhabta ah ee sagxadda SPC waxaa lagu sameeyay xudunta adag ee biyuhu, waxay sidoo kale la socotaa dammaanad-celin-celis ah oo ay weheliso dhamaystirka ganacsiga ee shirkadda ee muddada dheer si ay u bixiso 360 digrii .Sidaa darteed, looxa wuxuu aad ugu habboon yahay in lagu rakibo musqulaha iyo madbakhyada maadaama 100% ay biyuhu ka celinayaan.Gebi ahaanba waa caaryar-la'aan iyo caariyaysi-la'aan, waxay ku siinaysaa dareen jilicsan oo raaxo leh marka aad meel bannaan la gasho cago qaawan.
Sagxada dhabta ah ee SPC waxay ku siinaysaa dareen alwaax la mid ah laakiin sidoo kale inaad ka xorowdo madax xanuunka meelaha qoyan.
| Tilmaamid | |
| Dusha Texture | Qoryaha Qoryaha |
| Dhumucda guud | 6.5mm |
| Hoosta (ikhtiyaar) | IXPE/EVA(1mm/1.5mm) |
| Lakabka xidho | 0.5mm(20 milyan) |
| Ballaca | 7.25" (184mm.) |
| Dhererka | 48" (1220mm.) |
| dhame | Dahaarka UV |
| Guji |  |
| Codsiga | Ganacsiga & Deegaanka |
| SPC RIGID-CORE XOGTA TECHNICAL PLANK | ||
| Macluumaadka Farsamada | Habka Imtixaanka | Natiijooyinka |
| Cabbir | EN427 & | Gudub |
| Dhumucda guud ahaan | EN428 & | Gudub |
| Dhumucda lakabyada xidhashada | EN429 & | Gudub |
| Deganaanshaha cabbirka | IOS 23999:2018 & ASTM F2199-18 | Jihada wax soo saarka ≤0.02% (82oC @ 6saacadood) |
| Guud ahaan jihada wax-soo-saarka ≤0.03% (82oC @ 6saacadood) | ||
| Curling (mm) | IOS 23999:2018 & ASTM F2199-18 | Qiimaha 0.16mm(82oC @ 6 saacadood) |
| Xoogga diirka (N/25mm) | ASTM D903-98 (2017) | Tilmaamaha Wax-soo-saarka 62 (Celceliska) |
| Guud ahaan jihada wax-soo-saarka 63 (celcelis ahaan) | ||
| Load taagan | ASTM F970-17 | Gelida Hadhaaga:0.01mm |
| Gelitaan Hadhaaga ah | ASTM F1914-17 | Gudub |
| Iska caabinta xoqitaanka | ISO 1518-1: 2011 | Ma jiro dahaarka dhexda u saaran culeyska 20N |
| Quful Quful (kN/m) | ISO 24334:2014 | Jihada wax soo saarka 4.9 kN/m |
| Guud ahaan jihada wax-soo-saarka 3.1 kN/m | ||
| Midabka Xajmiga Iftiinka | ISO 4892-3:2016 Wareega 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥ 6 |
| Falcelinta dabka | TS EN14041: 2018 Farqada 4.1 & EN 13501-1: 2018 | Bfl-S1 |
| ASTM E648-17a | Fasalka 1 | |
| ASTM E 84-18b | Fasalka A | |
| Soosaarka VOC | BS EN 14041:2018 | ND – Gudub |
| ROHS/ Birta culus | EN 71-3:2013+A3:2018 | ND – Gudub |
| Gaadhi | Maya 1907/2006 GAAR | ND – Gudub |
| Formaldehyde sii deynta | BS EN14041:2018 | Fasalka: E 1 |
| Imtixaanka Phthalate | BS EN 14041:2018 | ND – Gudub |
| PCP | BS EN 14041:2018 | ND – Gudub |
| Socdaalka Qaybaha Qaar | EN 71 - 3:2013 | ND – Gudub |
| Macluumaadka Xirmada (4.0mm) | |
| Kumbuyuutar/ctn | 12 |
| Miisaanka(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Miisaanka (KG)/GW | 24500 |
