Sebaka sa 'nete sa Ponahalo ea SPC
Tlhaloso:
Ntho:JSD39
Botenya:4.0mm ~ 8.0mm
Apara Layer:0.2mm ~ 0.7mm
Katlase (Taba ea boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Customization
Ntlafatsa chebahalo ea ofisi kapa ntlo ea hau ka TopJoy rigid core vinyl tile.
Ka mokhoa oa sebele oa lijo-thollo tsa lehong, mapolanka ana a fana ka ponahalo ea sebele ea lehong.
Kaha mokato ona ha o kenelle metsi, o khothaletsoa bakeng sa tšebeliso ea bolulo le ea khoebo.
Pono e hlahang ho Authentic Look SPC Flooring e khothalelitsoe ke lefatše le re potileng.Sebopeho sa makhapetla a sefate sa stria se nang le 'mala oa sebele oa lijo-thollo oa lehong o etsisa botle ba tlhaho ka ho phethahetseng.
Ke Blogona Color e tlisa moea o motle mme ke khetho e phethahetseng bakeng sa libaka tsa hau tsa bolulo;
Ntle le ho fana ka ponahalo ea 'nete ea lepolanka, lepolanka lena, joalo ka ha sebopeho sa rona sa 'Nete sa SPC se entsoe ka mokokotlo o thata o sa keneleng metsi, se tla le tiiso ea Spill-proof mme e kopantsoe le pheletso ea nako e telele ea khoebo ea k'hamphani ho fana ka ts'ireletso ea likhato tse 360. .Ka hona, lepolanka le loketse ho kenngoa ka likamoreng tsa ho hlapela le ka kichineng kaha ha le kenelle metsi ka 100%.Ha e na hlobo ka ho felletseng ebile ha e na hlobo ha e ntse e le teng, e fana ka maikutlo a bonolo le a boiketlo a ka tlas'a maoto ha u kena sebakeng ka leoto le se nang letho.
Sebopeho sa 'nete sa SPC se u fa maikutlo a tšoanang a lehong le thata empa hape le ho se be le hlooho e opang libakeng tse metsi.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 6.5 limilimithara |
| Katlase (Ha ho boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.5 limilimithara.(20 Mil.) |
| Bophara | 7.25" (184mm.) |
| Bolelele | 48" (1220mm.) |
| Qetella | Ho roala ha UV |
| Tobetsa |  |
| Kopo | Khoebo & Bolulo |
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
