Badbaadada iyo Raaxada Cagta Hoosteeda oo leh Sagxadda SPC
Sharaxaad:
Shayga:TYM506
Dhumucda:4.0mm ~ 8.0mm
Lakabka xidho:0.2mm ~ 0.7mm
Underlay (Ikhtiyaar ah):EVA/ IXPE, 1.0mm ~ 2.0mm
Cabbirka:12 "X 24"/ 12" X 12"/ Habaynta
Sida nooca cusboonaysiinta ee sagxadaha LVT, sagxadda SPC waxay noqotay mid aad iyo aad caan uga ah suuqa sagxadaha, kaliya maahan muuqaalkeeda biyuhu aanay isbarbar dhigin, laakiin sidoo kale sababtoo ah sifooyinkeeda aadka u wanaagsan ee adkeysiga.Way fududahay in la joogteeyo, Eco-saaxiibtinimo, adkaysi u leh boodada, caabbinta kiimikaad leh midabyo iyo noocyo badan.Shaki kuma jiro in hadda si weyn loo isticmaalo meelo badan ayaa noqday mid ka mid ah dabaqyada ugu kulul.
Faahfaahinta Alaabta
Mid ka mid ah waxyaabaha sixirka ah ee sagxadaha SPC ee macaamiisheena ayaa ah, haddii aad tahay taageere muuqaalka dhagaxa ama aad doorbidayso muuqaalka alwaax, waxaad had iyo jeer ka heli kartaa qaabka aad ugu jeceshahay sagxadda SPC, ama xitaa waxaad tahay taageere weyn oo dhagax ah- u fiirso tile, laakiin la yaabban diirran oo raaxo leh cagaha hoostiisa, sagxadda SPC waxay ku qancin kartaa hal mar.U dooro looxa SPC sida sagxadda gurigaaga, booskaaga bannaan, ayaa kuu noqda fikradda xigmadda leh, sababtoo ah, hal shay, way fududahay in la helo hal qaab oo caan ah oo aad u badan tahay, ma xaddidi doono marka waxay timaaddaa inaad ka fikirto qaabka qolkaaga oo dhan, oo leh kumanaan qaabab caan ah oo la heli karo, waa inaysan kugu adkaan inaad ogaato mid ku habboon fikradaada, xitaa naqshadda gaarka ah ee booskaaga.Iyada oo muuqaalkeeda caadiga ah ee cagta hoosteeda, waxay ku siinaysaa badbaado weli jilicsan oo raaxo leh, ma dareemi doontid qabow iyo adag xitaa marka sagxadda aad wajahdo ay tahay muuqaalka quruxda quruxda badan.Sagxadda SPC, kaliya kuma siinayso badbaado iyo raaxo cagaha hoosteeda ah, laakiin sidoo kale waxay kugu qancinaysaa siyaabo badan, sida muuqaalkeeda quruxda badan oo aad dooran karto.
| Tilmaamid | |
| Dusha Texture | Qoryaha Qoryaha |
| Dhumucda guud | 4mm |
| Underlay (Ikhtiyaar ah) | IXPE/EVA(1mm/1.5mm) |
| Lakabka xidho | 0.2mm(8 milyan) |
| Ballaca | 12" (305mm.) |
| Dhererka | 24" (610mm.) |
| dhame | Dahaarka UV |
| Nidaamka Qufulka |
|
| Codsiga | Ganacsiga & Deegaanka |
Xogta Farsamada
 SPC RIGID-CORE XOGTA TECHNICAL PLANK | ||
| Macluumaadka Farsamada | Habka Imtixaanka | Natiijooyinka |
| Cabbir | EN427 & | Gudub |
| Dhumucda guud ahaan | EN428 & | Gudub |
| Dhumucda lakabyada xidhashada | EN429 & | Gudub |
| Deganaanshaha cabbirka | IOS 23999:2018 & ASTM F2199-18 | Jihada wax soo saarka ≤0.02% (82oC @ 6saacadood) |
| Guud ahaan jihada wax-soo-saarka ≤0.03% (82oC @ 6saacadood) | ||
| Curling (mm) | IOS 23999:2018 & ASTM F2199-18 | Qiimaha 0.16mm(82oC @ 6 saacadood) |
| Xoogga diirka (N/25mm) | ASTM D903-98 (2017) | Tilmaamaha Wax-soo-saarka 62 (Celceliska) |
| Guud ahaan jihada wax-soo-saarka 63 (celcelis ahaan) | ||
| Load taagan | ASTM F970-17 | Gelida Hadhaaga:0.01mm |
| Gelitaan Hadhaaga ah | ASTM F1914-17 | Gudub |
| Iska caabinta xoqitaanka | ISO 1518-1: 2011 | Ma jiro dahaarka dhexda u saaran culeyska 20N |
| Quful Quful (kN/m) | ISO 24334:2014 | Jihada wax soo saarka 4.9 kN/m |
| Guud ahaan jihada wax-soo-saarka 3.1 kN/m | ||
| Midabka Xajmiga Iftiinka | ISO 4892-3:2016 Wareega 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥ 6 |
| Falcelinta dabka | TS EN14041: 2018 Farqada 4.1 & EN 13501-1: 2018 | Bfl-S1 |
| ASTM E648-17a | Fasalka 1 | |
| ASTM E 84-18b | Fasalka A | |
| Soosaarka VOC | BS EN 14041:2018 | ND – Gudub |
| ROHS/ Birta culus | EN 71-3:2013+A3:2018 | ND – Gudub |
| Gaadhi | Maya 1907/2006 GAAR | ND – Gudub |
| Formaldehyde sii deynta | BS EN14041:2018 | Fasalka: E 1 |
| Imtixaanka Phthalate | BS EN 14041:2018 | ND – Gudub |
| PCP | BS EN 14041:2018 | ND – Gudub |
| Socdaalka Qaybaha Qaar | EN 71 - 3:2013 | ND – Gudub |
Macluumaadka Xirmada:
| Macluumaadka Xirmada (4.0mm) | |
| Kumbuyuutar/ctn | 12 |
| Miisaanka(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Miisaanka (KG)/GW | 24500 |
