Qaabka dhagaxa ah ee SPC RIGID CORE PLANK
Sharaxaad:
Shayga:TYM 211
Dhumucda:4.0mm ~ 8.0mm
Lakabka xidho:0.2mm ~ 0.7mm
Underlay (Ikhtiyaar ah):EVA/ IXPE, 1.0mm ~ 2.0mm
Cabbirka:12 "X 24"/ 12" X 12"/ Habaynta
Dabaqa looxa looxa SPC ee dhagaxa adag waxa uu leeyahay degenaansho aad u sareeysa, adkeysi saameyn sare leh iyo nashqad abaal marineed oo sagxadaha raaxada ah.Sagxadda looxa looxa ee TopJoy Rigid Core SPC waa 100% aan biyuhu lahayn, saaxiibtinimada xayawaanka, iyo ka-hortagga-termit-ka.Sagxada SPC waa la isticmaali karaa isla markiiba ka dib marka la rakibo.Looxa xudunta adag ee SPC-dana way fududahay in la kala diro oo dib loo isticmaalo.
Faahfaahinta Alaabta
Qaabka dhagxaanta ee TopJoy SPC looxa xudunta adag ayaa loo arkaa jiilka cusub ee daboolida sagxadda.
SPC sagxadda sagxadda udubdhexaadka ah ee adag waxay la socotaa qufulka shirkadda Unilin.Oo waxaan isticmaalnaa qalabka jarmalka ee xawaaraha sare leh, tignoolajiyada goynta saxda ah ee saxda ah, goynta xagal qumman oo qumman.Waxaan leenahay oog siman oo aan tol lahayn.
Ka ilaali sagxadda haddii ay dhacdo inay biyo-macaan shil ah.Si fudud ayaa loogu rakibi karaa nooc ka duwan saldhigga sagxadaha, ha ahaato shubka, dhoobada ama sagxadaha jira.
TopJoy waxay aqbashaa OEM waxayna habaysaa naqshadeynta.Waxa jira kumanaan qaab oo doorashadaada ah.SPC Dhererka sagxadda, ballaca, iyo dhumucda waxa loo habayn karaa iyadoo loo eegayo baahidaada.Dhumucda guud waa 4mm-8mm.Iyo IXPE/EVA hoosta si looga dhigo sagxadda asaasiga ah ee adag ee dhawaaqa ka wanaagsan iyo dareenka cagaha hoostiisa oo aad u wanaagsan.Saxeexa adag ee xudunta u ah SPC waa mid aan la dumin karin, taas oo ka dhigaysa doorasho ku habboon jawiga gaadiidka iyo ganacsiga sareeyo.
| Tilmaamid | |
| Dusha Texture | Qoryaha Qoryaha |
| Dhumucda guud | 4mm |
| Underlay (Ikhtiyaar ah) | IXPE/EVA(1mm/1.5mm) |
| Lakabka xidho | 0.2mm(8 milyan) |
| Ballaca | 12" (305mm.) |
| Dhererka | 24" (610mm.) |
| dhame | Dahaarka UV |
| Nidaamka Qufulka |
|
| Codsiga | Ganacsiga & Deegaanka |
Xogta Farsamada
 SPC RIGID-CORE XOGTA TECHNICAL PLANK | ||
| Macluumaadka Farsamada | Habka Imtixaanka | Natiijooyinka |
| Cabbir | EN427 & | Gudub |
| Dhumucda guud ahaan | EN428 & | Gudub |
| Dhumucda lakabyada xidhashada | EN429 & | Gudub |
| Deganaanshaha cabbirka | IOS 23999:2018 & ASTM F2199-18 | Jihada wax soo saarka ≤0.02% (82oC @ 6saacadood) |
| Guud ahaan jihada wax-soo-saarka ≤0.03% (82oC @ 6saacadood) | ||
| Curling (mm) | IOS 23999:2018 & ASTM F2199-18 | Qiimaha 0.16mm(82oC @ 6 saacadood) |
| Xoogga diirka (N/25mm) | ASTM D903-98 (2017) | Tilmaamaha Wax-soo-saarka 62 (Celceliska) |
| Guud ahaan jihada wax-soo-saarka 63 (celcelis ahaan) | ||
| Load taagan | ASTM F970-17 | Gelida Hadhaaga:0.01mm |
| Gelitaan Hadhaaga ah | ASTM F1914-17 | Gudub |
| Iska caabinta xoqitaanka | ISO 1518-1: 2011 | Ma jiro dahaarka dhexda u saaran culeyska 20N |
| Quful Quful (kN/m) | ISO 24334:2014 | Jihada wax soo saarka 4.9 kN/m |
| Guud ahaan jihada wax-soo-saarka 3.1 kN/m | ||
| Midabka Xajmiga Iftiinka | ISO 4892-3:2016 Wareega 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥ 6 |
| Falcelinta dabka | TS EN14041: 2018 Farqada 4.1 & EN 13501-1: 2018 | Bfl-S1 |
| ASTM E648-17a | Fasalka 1 | |
| ASTM E 84-18b | Fasalka A | |
| Soosaarka VOC | BS EN 14041:2018 | ND – Gudub |
| ROHS/ Birta culus | EN 71-3:2013+A3:2018 | ND – Gudub |
| Gaadhi | Maya 1907/2006 GAAR | ND – Gudub |
| Formaldehyde sii deynta | BS EN14041:2018 | Fasalka: E 1 |
| Imtixaanka Phthalate | BS EN 14041:2018 | ND – Gudub |
| PCP | BS EN 14041:2018 | ND – Gudub |
| Socdaalka Qaybaha Qaar | EN 71 - 3:2013 | ND – Gudub |
Macluumaadka Xirmada:
| Macluumaadka Xirmada (4.0mm) | |
| Kumbuyuutar/ctn | 12 |
| Miisaanka(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Miisaanka (KG)/GW | 24500 |
