100% e sa keneleng metsi SPC Vinyl Click Flooring
Tlhaloso:
Ntho:JSD22
Botenya:4.0mm ~ 8.0mm
Apara Layer:0.2mm ~ 0.7mm
Katlase (Taba ea boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Customization
TopJoy's SPC vinyl Click floor e hahiloe holimo ho isa tlase ho 100% e sa keneleng metsi.E loketse libaka tsohle tsa lehae tse nang le mongobo ho kenyelletsa kichine, libate le likamore tse ka tlase, SPC vinyl Click floor e bolaea phoofolo ea tonanahali ea mongobo hantle.
Se ke oa nka mantsoe a rona, fumana lisampole 'me u ba fe phephetso ea libakete kajeno.
A na u ntse u khahliloe ke mokhoa oa ho robala oa setso joalo ka ha re ne re etsa?Mohlomong u lokela ho tseba sebaka se ntlafalitsoeng sa SPC, sethala se thata sa theknoloji sa LVT, se loketseng kamore efe kapa efe ea lehae la hau le ofisi.E 'ngoe ea melemo e tloaelehileng ea SPC flooring ke 100% ea eona e sa keneleng metsi, ho bolelang hore mokato ona oa fatše o ka sebelisoa e le sekoahelo sa kichine ea hau esita le kamore ea ho hlapela,' me ka sebele ha se mantsoe a puo kapa a papatso feela, hobane SPC flooring e tumme ka ho thatafala ha eona. core tech, karolo e kholo ea eona e sa tsoa etsoa ka polymer ea majoe, ke lebitso leo le tsoang ho lona.Ho phaella ho seo, bapisa le floating ea khale ea Vinyl esita le WPC flooring, SPC e u tlisetsa boikutlo bo phethahetseng ba mofuthu le boiketlo bo matla tlas'a maoto.Kahoo ka SPC Vinyl Click flooring, ha ho hlokahale hore u khethe le ho reka sekoaelo sa fatše ha u khabisa ntlo ea hau kapa ofisi, ha se feela thepa e phethahetseng bakeng sa kamore ea hau, hape e fumaneha ka kichineng le ntloaneng ea hau, hobane 100% tšobotsi e sa keneleng metsi.Tšepa SPC fatše, tšepa TopJoy flooring.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 3.5 limilimithara |
| Katlase (Ha ho boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.2 limilimithara.(8Mil.) |
| Bophara | 6" (152mm.) |
| Bolelele | 36" (914mm.) |
| Qetella | Ho roala ha UV |
| Tobetsa |  |
| Kopo | Khoebo & Bolulo |
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
