E phethahetseng Grey Marble Sheba SPC Rigid Core Flooring
Tlhaloso:
Ntho:TYM 214
Botenya:4.0mm ~ 8.0mm
Apara Layer:0.2mm ~ 0.7mm
Katlase (Taba ea boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:12" X 24"/ 12" X 12"/ Ho iketsetsa
SPC rigid core flooring ke 100% e sa keneleng metsi.Kahoo e ka sebelisoa ho pharaletseng ho feta floating ea setso.TYM 214 ke chebahalo ea 'mabole ea tlhaho, botenya bo tloaelehileng ke 4.0mm/5.0mm/6.0mm.Sekhahla sa ho roala se tloha ho 0.2mm ho isa ho 0.7mm.Boholo ba thaele ke 12" x 24" (305mm x 610mm).
Kaha fuluru ea SPC ha e na metsi ebile ha e na mongobo, ha e na likokoanyana le mohloa, e ka sebelisoa ka nako e telele ho feta ho lula fatše kamehla.E entsoe ka metsoako ea majoe le ea polasetiki, karolo e ka sehloohong ke lejoe la mokoetla (calcium carbonate) + PVC Powder + Stabilizer, kahoo e na le botsoalle ba tikoloho ebile e ka sebelisoa hape, ha e na tšilafalo.Bokaholimo bo alafshoa ka lesela la UV, ha le etse feela hore le shebahale joalo ka lejoe la tlhaho la 'mabole empa hape le etsa hore le hloekisoe habonolo, batho ba ka sebelisa mopo ho hloekisa letsatsi le letsatsi, le bolokela batho nako e ngata le matla, ke e 'ngoe ea melemo.Matt, gloss e bohareng ke kalafo e tsebahalang ka ho fetesisa ea sefahleho sa 'mabole ea SPC.Re ka etsa li-embossing tse fapaneng ho latela lipaterone tse fapaneng.Ha e kenelle mollo hape, e ka thibela ho chesa ka sehlopha sa B1 sa ho thibela mollo.E na le khanyetso ea super wear, 'me e loketse tšebeliso ea malapa le ea khoebo.Lipaterone tse fetang 800 li fumaneha.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ha ho boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.3 limilimithara.(12 Mil.) |
| Bophara | 12" (305mm.) |
| Bolelele | 24" (610mm.) |
| Qetella | Ho roala ha UV |
| Tobetsa |  |
| Kopo | Khoebo & Bolulo |
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
