Tobetsa Ho kenya Vinyl Flooring
Tlhaloso:
Ntho:JSD01
Botenya:4.0mm ~ 8.0mm
Apara Layer:0.2mm ~ 0.7mm
Katlase (Taba ea boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Customization
Ho kenya sistimi ea ho notlela ea Unilin bakeng sa ho kenya habonolo, ho matla ebile ho bolokehile
Likamore tsohle tsa SPC li amohela ho tobetsa Unilin kapa Unipush ho kenya habonolo le DIY.
Botenya ba 5mm bo loketse khoebo le bolulo.
SPC flooring e na le litifikeiti tse felletseng tsa ho kena naheng ea heno.
SPC vinyl flooring e bonolo haholo ho kenya.E ka ba 50% ka potlako ho feta sekhomaretsi sa setso se theoha.Ka uniclick le unipush lock system, ho kenya ke moea o fokang bakeng sa bohle ba amehang.Bakeng sa sistimi e khethehileng ea ho tobetsa, batho ba kenya holim'a subfloor e teng ebe ba hula ha ba tsamaea ntle le ho senya letho.Kahoo e boetse e loketse ho sebelisa pontšong, matlo a khiriso joalo-joalo.E hloka feela thipa e sebetsang bakeng sa ho itšeha, TopJoy e fana ka maemo a bonolo ho ikamahanya le libaka tse thata ha u ntse u boloka ho tiea ho lekaneng ho lumella ho kenngoa holim'a subfloor e sa phethahalang.Tobetsa vinyl flooring ha e hloke setsebi sa setsebi ho thusa bareki ho kenya.Re kenya feela "click vinyl flooring" ka borona.Ts'ebetso ena e sebetsang hantle haholo e boloka nako le chelete ho moreki.Tobetsa ho kenya li-vinyl flooring ho na le mekhoa e fapaneng ea ho kenya u le mong.Mekhoa ea ho kenya e kenyelletsa 90 degree random, 45 degree random, 90 degree subway style, 45 degree subway style, 90 degree herringbone, 45 degree herringbone le DIY moralo.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 7mm |
| Katlase (Ha ho boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.5 limilimithara.(20 Mil.) |
| Bophara | 6" (152mm.) |
| Bolelele | 36" (914mm.) |
| Qetella | Ho roala ha UV |
| Tobetsa |  |
| Kopo | Khoebo & Bolulo |
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
