Sefate sa Vinyl se Rigid Core
Tlhaloso:
Ntho:JSA12
Botenya:4.0mm ~ 8.0mm
Apara Layer:0.2mm ~ 0.7mm
Katlase (Taba ea boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Customization
Sefate se thata sa vinyl ha se na 100% formaldehyde mahala.
E fana ka khanyetso ho mengoapo le matheba 'me ho bonolo ho e boloka e hloekile.
SPC e tobetsa feela sebakeng, e felise tlhoko ea li-glues tse bohlasoa le tse rarahaneng.Re amohela boholo le mebala ea hau.
Sefate sa vinyl se thata se na le matla a holimo a anti-abrasion, liperesente tse 100 tse sa keneleng metsi le formaldehyde mahala.e ke ke ea monya metsi kapa hona ho boloka baktheria.E ka sebelisoa sebakeng leha e le sefe lapeng ka holimo kapa ka tlase ho sehlopha.E sebetsa hantle ka kichineng kapa bateng, libaka tse phahameng tsa mongobo.Ka lebaka la thepa e khethehileng le sebopeho sa vinyl core floor, e boetse e loketse lipetlele, likolo, mabenkele a mabenkele, mabenkele a maholo le libaka tse ling tse nang le sephethephethe se phahameng.Lepolanka la vinyl le na le chebahalo ea boemo bo holimo le litšoantšo tsa oak tsa Senyesemane.U ka nka le ho beha limela tsa 9'x48'size ka likamoreng le kichineng, e kenngoa ka litšoantšo tsa sebele tsa lehong.Ho ba le vinyl fatše fatše le ho lumella batho ho tsamaea le ho ikutloa ka tlas'a maoto ke tsela e molemohali ea ho bontša.A na u na le thahasello ho rigid core flooring?U ke ke ua ikoahlaela khetho ea hao.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ha ho boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.3 limilimithara.(12 Mil.) |
| Bophara | 7.24" (184mm.) |
| Bolelele | 48" (1220mm.) |
| Qetella | Ho roala ha UV |
| Tobetsa |  |
| Kopo | Khoebo & Bolulo |
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
