Mobala o Lefifi oa Hardwood o shebahala ka LVP Flooring
Tlhaloso:
Ntho:JSC505
Botenya:4.0mm ~ 8.0mm
Apara Layer:0.2mm ~ 0.7mm
Katlase (Taba ea boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Customization
Joalo ka ha bohle re tseba bohlokoa ba ho sireletsa tikoloho, ka hona ha re tloheleng ho rema lifate bakeng sa ho hlahisa lehong le thata.Joale, mokatong oa rona oa LVP o ka etsisa sebopeho sa 'nete sa lehong hantle, se ts'oarang leoto le ts'ebetso e ntle haholo ka 100% eco-friendly material.
Sebaka se lefifi sa walnut se amoheloa lefatšeng ka bophara, empa ho rekisa meru ho hlahisa fatše ho senya haholo ebile ho theko e boima.TopJoy e etsisa mmala o motšo oa LVP fatše, e ka kopana le batho ba batlang lehong la tlhaho bakeng sa ho khabisa empa ba na le tekanyetso e fokolang.Ka hona, TopJoy LVP's (lepolanka la vinyl ea maemo a holimo) e hlahang e tlisetsa bareki khetho e ntle.Boholo ba LVP bo tla sebelisoa libakeng tsa khoebo, ka mabaka a ts'ebetso ea eona e kholo le litšenyehelo tse tlase.Ts'ebetso e kholo ke hore LVP e ka hlahisoa ka mekhoa e sa tšoaneng, LVP e ka sebelisoa libakeng tse phahameng tsa sephethephethe, 'me LVP e theko e tlaase haholo ho feta lehong le thata empa ka ts'ebetso e tšoanang.Mebala e lefifi ea LVP ea 'mala o motšo ha e tšoanele feela setaele sa mokhabiso oa kahare, empa hape e lumellana le setaele sa sejoale-joale se bonolo sa moralo oa kahare.Ho khetha TopJoy LVP walnut floating ho sireletsa tikoloho ho tloha ho rema lifate tse fokolang, tse tla etsoa mekato e thata ea lehong.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 5mm |
| Katlase (Ha ho boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.5 limilimithara.(20 Mil.) |
| Bophara | 7.25" (184mm.) |
| Bolelele | 48" (1220mm.) |
| Qetella | Ho roala ha UV |
| Tobetsa |  |
| Kopo | Khoebo & Bolulo |
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
