Tile ea Vinyl ea Khapete-plus e nang le Rigid Core
Tlhaloso:
Ntho:984-03s
Botenya:4.0mm ~ 8.0mm
Apara Layer:0.2mm ~ 0.7mm
Katlase (Taba ea boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:12" X 24"/ 12" X 12"/ Ho iketsetsa
SPC Luxury Vinyl floor Carpet-plus ke pokello e ncha e entsoeng ke Tapjoy.E kopana le tlhokahalo e ntle ea barati ba k'hapete ea setso ha e ntse e tlosa mathata ha e ntse e lokisa ka lebaka la motheo oa eona o thata oa SPC o sa keneleng metsi le o hanang matheba.984-03S ea mohlala e na le sebopeho se lohiloeng ka metsero e bohlooho bo molora le li-rectangles tse lefifi tse bohlooho li fana ka maikutlo a mofuthu ho malapa kapa liofising.
Joalo ka mofuta oa khale oa fatše, Carpet e hohela batho ba ratang mokhabiso oa fatše o mebala-bala le o bonolo.Empa ha ho tluoa tabeng ea tlhokomelo ea letsatsi le letsatsi, e ka fetoha ntho e nyarosang.E boloka mongobo le matheba habonolo.Hangata, e tlameha ho hloekisoa ka lik'hemik'hale tse ling tse ka bakang kotsi bophelong.Ho TopJoy, pokello ea rona e ncha ea Carpet-plus SPC rigid core vinyl flooring e na le 'mala o tšoanang oa k'hapete empa e na le ts'ebetso e phethahetseng e sa keneleng metsi le e thibelang matheba.
Ho bonolo ho e kenya ka sistimi ea eona ea ho notlela ho notlela hammoho le tag ea eona ea theko e leka-lekaneng e nolofalletsa malapa a tloaelehileng a nang le tekanyetso e lekanyelitsoeng le eona e ka rekoang.
Ka boleng bo botle ba underlayment, Carpet-plus SPC rigid core vinyl flooring e boetse e phutholohile tlas'a maoto le ho fokotseha ha molumo.E na le tikoloho e ntle ho feta mokato oa k'hapete oa setso kaha thepa e ka sebelisoa hape ka 100%.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ha ho boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.3 limilimithara.(12 Mil.) |
| Bophara | 12" (305mm.) |
| Bolelele | 24" (610mm.) |
| Qetella | Ho roala ha UV |
| Tobetsa |  |
| Kopo | Khoebo & Bolulo |
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
