Ho bonolo ho kenya Hybrid Flooring
Tlhaloso:
Ntho:AP1157L-17-EIR
Botenya:4.0mm ~ 8.0mm
Wear Layer:0.2mm ~ 0.7mm
Katlase (Ka boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Customization
SPC Vinyl flooring e etsisa ka ho hlaka 'mala le lithollo tsa fatše ha e se lehong la sebele.Esita le setsebi se ne se ka thetsoa ke mahlo a sona ntle le ho se tšoara.E kopanya botle ba lehong la tlhaho le theknoloji ea morao-rao.Ka theko e tlase haholo ha e bapisoa le fatše e tiileng ea lehong, e nepahetse ka mokhoa o ikhethang bakeng sa tšebeliso ea khoebo le ea malapeng.
Lintlha tsa Sehlahisoa:
TopJoy SPC Vinyl Flooring ke mokhoa oa morao-rao oa theknoloji ea fatše, lejoe-polymer composite flooring, hase feela 100% e sa keneleng metsi le ho hanyetsa mollo, empa e boetse e fana ka botsitso bo boholo, ho tšoarella le ho hanyetsa tšusumetso ho fihlela makhetlo a 20 a theknoloji ea hona joale ea fatše ea laminate.Le hoja marulelo a laminate a sa kenelle metsi, a phuthela kapa a phuthela ha a kopana le mongobo kapa metsi, SPC ea fatše e rarolla mathata a eona 'me e tumme lefatšeng ka bophara.
Holim'a moo, e 'ngoe le e' ngoe ea lihlahisoa tsena e na le ts'ebetso e bonolo ea ho tobetsa, e se nang glue, e bolokang nako le chelete.
E boetse e thusa bana, e thibela ho thella ebile e bonolo ho e hloekisa.Mokato o thata oa mantlha o boetse o pata mefokolo ea subfloor, o fana ka insulation e ntle ea molumo le boiketlo bo phahameng ka tlas'a maoto.
Ho tloha libakeng tsa bolulo ho isa libakeng tsa khoebo, fatše SPC e khona ho koahela litlhoko tsohle tsa hau.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ka boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.2 limilimithara.(8 Mil.) |
| Bophara | 7.25" (184mm.) |
| Bolelele | 48" (1220mm.) |
| Qetella | Ho roala ha UV |
| Locking System |
|
| Kopo | Khoebo & Bolulo |
Lintlha tsa Tekheniki:
 SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND - Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND - Feta |
| Finyella | No 1907/2006 REACH | ND - Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND - Feta |
| PCP | BS EN 14041:2018 | ND - Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND - Feta |
Lintlha tsa ho paka:
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
