Mapolanka a Majabajaba a Vinyl LVT Tile Click Floating Floating Floating Metsi
Tlhaloso:
Ntho:RR1034-1-EIR
Botenya:4.0mm ~ 8.0mm
Wear Layer:0.2mm ~ 0.7mm
Katlase (Ka boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Customization
Likamore tse thata tsa vinyl kapa tsa SPC, li ka sebelisoa ka phapusing efe kapa efe ka tlung ea hau joalo ka kichine, likamore tsa ho jella, likamore tsa ho robala, likamore tsa ho hlapela, foyers le likamore tse ka tlase.E etselitsoe ho kopanya litšobotsi tse ntle ka ho fetisisa tsa vinyl le laminate hammoho ho u fa tharollo ea ho qetela ea fatše bakeng sa morero ofe kapa ofe.
Sefate sa vinyl se thata ke mofuta oa vinyl o kopantsoeng le thepa e 'ngoe.E etselitsoe ho kopanya litšobotsi tse ntle ka ho fetisisa tsa vinyl le laminate hammoho ho u fa tharollo ea ho qetela ea fatše bakeng sa morero ofe kapa ofe.Theknoloji e ncha ea mantlha le bokaholimo bo koahetsoeng ke UV bo etsa hore e be e loketseng ho sebelisa mefuta eohle ea kamore.Ho tiea ha eona le ho hanyetsa ha eona ho bolela hore e mamella sephethephethe se boima ka ho fetisisa sa maoto lapeng kapa libakeng tsa khoebo.Thepa ea Rigid core vinyl flooring e etsa hore e be sehlahisoa sa 100% se sa keneleng metsi, se ka kenngoa libakeng tse metsi, ho kenyeletsoa libaka tse kang liphaposi tsa ho hlapela, liaparo tsa ho hlatsoetsa le kichine.Ha ua tlameha ho tšaba ho qhalana ha metsi 'me fatše ho ka ba metsi.Ho hahoa ha liboto tsa mantlha ho boetse ho bolela hore liphetoho tse feteletseng tsa mocheso ha li na phello e fokolang kapa ha li na phello ho eona 'me e ka mamella khanya ea letsatsi ho feta mefuta e meng ea fatše.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ka boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.2 limilimithara.(8 Mil.) |
| Bophara | 7.25" (184mm.) |
| Bolelele | 48" (1220mm.) |
| Qetella | Ho roala ha UV |
| Locking System |
|
| Kopo | Khoebo & Bolulo |
Lintlha tsa Tekheniki:
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND - Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND - Feta |
| Finyella | No 1907/2006 REACH | ND - Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND - Feta |
| PCP | BS EN 14041:2018 | ND - Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND - Feta |
Lintlha tsa ho paka:
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
