Mokatong oa Sejoale-joale oa Gray Hard Surface Rigid Core Flooring
Tlhaloso:
Ntho:JSD54
Botenya:4.0mm ~ 8.0mm
Apara Layer:0.2mm ~ 0.7mm
Katlase (Taba ea boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Customization
Mokato oa sejoale-joale oa Grey Hard Surface Rigid Core Floor o shebahala o le boreleli ebile o le fesheneng, mekato e putsoa e etsa hore ho be le ntlo e pholileng, ea sejoale-joale.Sena se ka khotsofatsa setaele seo u batlang mokhabiso oa konteraka oa sejoale-joale.Ka papiso ea lijo-thollo tsa lehong, e ke ke ea kenngoa feela sebakeng sa bolulo, empa hape e tumme ka kichineng le sebaka sa ofisi.
Sebaka sa sejoale-joale se grey se setle ebile se fesheneng, se etselitsoe malapa a sejoale-joale, mabenkele a mabenkele le lireschorente tse majabajaba.E etsisa lehong la tlhaho ka mokhoa o hlakileng ka theko e theko e tlaase ha e ntse e e-na le thepa e sa keneleng metsi le botsitso ba sebopeho ho feta lepolanka.
SPC rigid core flooring ke sekoaelo sa fatše se rekisoang ka ho fetisisa 'marakeng oa United States le Europe, haholo bakeng sa malapa a phathahaneng a nang le bana le liphoofolo tse ruuoang lapeng.Ho fapana le marulelo a mapolanka, a neng a ratoa malapeng a tsitsitseng, ha a kenelle metsi ka 100% 'me a ka sebelisoa lelapeng lohle ho kenyeletsa kichine, kamore ea ho hlapela le kamoreng e ka tlaase.Ponahalo ea majoe le 'mabole e etselitsoe ho nka sebaka sa lithaelese tsa ceramic tse batang ka leqhoa.Mokotla o thata o fana ka ho tšoarella ka ho fetelletseng, ho haneloa le ho haneloa ke matheba, ho etsa hore ho be le ho boloka le ho hloekisa moea.U ka sebelisa mopo o mongobo habonolo ho hloekisa fatše.
Lera le tiileng la mantlha le pata ho se phethahale ha subfloor.Ka hona e ka boela ea kenngoa holim'a hoo e batlang e le mekato efe kapa efe e thata e teng.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 5.5 limilimithara |
| Katlase (Ha ho boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.3 limilimithara.(12 Mil.) |
| Bophara | 7.25" (184mm.) |
| Bolelele | 36" (914mm.) |
| Qetella | Ho roala ha UV |
| Tobetsa |  |
| Kopo | Khoebo & Bolulo |
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
