Mobala o tiileng oa Vinyl Flooring Plank Lekhotleng le Tšepahalang
Tlhaloso:
Ntho:Tlhaloso: BSA04
Botenya:4.0mm ~ 8.0mm
Apara Layer:0.2mm ~ 0.7mm
Katlase (Taba ea boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Customization
Sefate sa vinyl se thata ha se 100% feela se sa keneleng metsi ebile se sa che, empa se boetse se fana ka botsitso bo boholo, ho tšoarella le ho hanyetsa tšusumetso ho fihlela makhetlo a 20 ho feta a theknoloji ea hona joale ea fatše ea laminate.E kopanya le moralo o pheta-phetoang botle le tlhaho ea lehong le thata e etsa hore ho be le fatše ho sa tsitsang bakeng sa ntlo ea hau.
TOPJOY Rigid Core Vinyl flooring Plank Loyal Court mmala, sehlahisoa sa fatše se feto-fetohang se sa sebetseng feela likamoreng tsa bolulo empa le libakeng tsa khoebo.Pono ea eona ea lehong e nkile likarolo tsa bolulo kaha e fa beng ba nts'etsopele mokhoa oa sebele oa lehong ka karoloana ea theko ea lehong la sebele.Libaka tsa khoebo li sebelisa mekhoa ea lehong maemong a mangata, leha ho le joalo lipono tsa tlhaho li fa likhoebo monyetla oa ho etsa boqapi le ho theha libaka tse ikhethang.
Lepolanka lena la vinyl le tiileng la 'mala oa lekhotla le tiileng ha le khantše setaele se setle le sa khale, empa hape le boloka botsitso le bots'epehi ba lona.Ka lebaka la sebopeho sa lona se ikhethileng, se kenyelletsang motheo oa lejoe le lesela le tšoarellang, le sa haneheng ho ts'oaroa ho ts'oana hammoho le lesela la UV, lepolanka ke lona le tšoarellang ka ho fetesisa le etselitsoeng tikoloho e thata ka ho fetisisa.
Lepolanka le thata la vinyl le u fa khotso ea kelello bakeng sa lilemo tse tlang.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ha ho boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.3 limilimithara.(12 Mil.) |
| Bophara | 7.25" (184mm.) |
| Bolelele | 48" (1220mm.) |
| Qetella | Ho roala ha UV |
| Tobetsa |  |
| Kopo | Khoebo & Bolulo |
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
