Stone Pattern SPC RIGID CORE PLANK
Tlhaloso:
Ntho:TYM 211
Botenya:4.0mm ~ 8.0mm
Apara Layer:0.2mm ~ 0.7mm
Katlase (Taba ea boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:12" X 24"/ 12" X 12"/ Ho iketsetsa
Stone Rigid core SPC lepolanka ea fatše e na le botsitso bo feteletseng, ts'ebetso e tšoarellang ea nako e telele le moralo o hapileng likhau bakeng sa fuluru e mabothobotho.TopJoy Rigid Core SPC fuluru ya lepolanka e 100% ha e kenelle metsi, e rata diphoofolo tsa lapeng, mme e thibela mohlwa.SPC flooring e ka sebelisoa hang ka mor'a ho kenya.'Me lepolanka le thata la SPC le bonolo ho le qhaqholla le ho le sebelisa hape.
TopJoy stone pattern SPC rigid core plank e nkoa e le moloko o mocha oa ho koahela fatše.
SPC e tiileng ea mapolanka a fatše a tla le senotlolo sa k'hamphani ea Unilin.'Me re sebelisa lisebelisoa tsa ho itšeha ka lebelo le phahameng la Jeremane, theknoloji ea ho itšeha ka mokhoa o nepahetseng haholo, ho itšeha ka lehlakoreng le letona.Re na le bokaholimo bo boreleli le bo sa tsitsang.
Sireletsa fatše haeba metsi a phalla ka phoso.E ka kenngoa habonolo mofuteng o fapaneng oa fatše, ebang ke konkreite, ceramic kapa fatše e teng.
TopJoy e amohela OEM mme e etsa moralo oa hau.Ho na le lipaterone tse likete bakeng sa khetho ea hau.SPC Bolelele ba fatše, bophara, le botenya bo ka etsoa ho latela tlhoko ea hau.Botenya ka kakaretso ke 4mm-8mm.'Me IXPE/EVA e ka tlase ho etsa hore fatše e thata ea mantlha e be le molumo o betere le maikutlo a matle ka tlas'a maoto.Mokotla o thata oa ho saena oa SPC o batla o sa senyehe, o e etsa khetho e nepahetseng bakeng sa tikoloho ea sephethephethe le khoebo.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ha ho boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.3 limilimithara.(12 Mil.) |
| Bophara | 12" (305mm.) |
| Bolelele | 24" (610mm.) |
| Qetella | Ho roala ha UV |
| Tobetsa |  |
| Kopo | Khoebo & Bolulo |
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
