Stone Texture Vinyl Tobetsa Rigid LVT Flooring
Tlhaloso:
Ntho:TPW002-A
Botenya:4.0mm ~ 8.0mm
Wear Layer:0.2mm ~ 0.7mm
Katlase (Ka boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:12" X 24"/ 18" X 18"/ 24" X 24", Ho itloaetsa
Ka ho sebelisa lejoe la mokoetla ho fihla ho 70% bohareng ba mapolanka a rona, re theha thepa e "thata" e ikhethang ea fuluru ea rona.Hase feela hore litaba tse phahameng tsa mokoetla li bolela ho atolosa le ho fokotseha ho fokolang ho qala, empa hape ho bolela hore ha ho atolosoa le ho fokotseha ho etsahala mekato e ka sebetsana le eona.Sena se re lumella ho khothaletsa tšebeliso ea sehlahisoa sa rona hoo e batlang e le ts'ebelisong efe kapa efe.
Fumana chebahalo ea 'nete ea 'nete ka TopJoy Rigid Core Luxury Vinyl Tile.E ka sebelisoa ho pholletsa le ntlo ea hau ka kichineng ea kamore ea ho hlapela kapa esita le mokatong o ka tlase ho etsa tharollo ea fatše e theko e tlaase le e tlase ea tlhokomelo ea fatše. boiketlo ha o le tlasa maoto.Etsa bonnete ba hore o qeta ho shebahala ka likotoana tse kang li-end caps stair noses reducers T-moldings le quarter round E tla mamella teko ea nako e nang le likarolo tsa bolulo ba bophelo bohle 'me e ntle bakeng sa lelapa le phathahaneng le sa batleng ho itela. e boloka bokhabane ka mafito a nang le sebopeho se nang le sebopeho le thollo ea fatše ea majoe ea 'nete.
Haeba u batla mokato o tšoarellang, o tšoarellang nako e telele le o sa keneleng metsi o ntlafatsang chebahalo ea sebaka sefe kapa sefe 'me o ke ke oa senya banka, romella potso HONA JOALE.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ka boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.2 limilimithara.(8 Mil.) |
| Bophara | 7.25" (184mm.) |
| Bolelele | 48" (1220mm.) |
| Qetella | Ho roala ha UV |
| Locking System |
|
| Kopo | Khoebo & Bolulo |
Lintlha tsa Tekheniki:
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND - Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND - Feta |
| Finyella | No 1907/2006 REACH | ND - Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND - Feta |
| PCP | BS EN 14041:2018 | ND - Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND - Feta |
Lintlha tsa ho paka:
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
