Plastic Core Artificial Click Stone Texture Vinyl Plank SPC Flooring
Tlhaloso:
Ntho ea bohlokoa: TPS001-G
Botenya:4.0mm ~ 8.0mm
Wear Layer:0.2mm ~ 0.7mm
Katlase (Ka boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:12" X 24"/ 18" X 18"/ 24" X 24", Ho itloaetsa
E entsoe ka thepa ea boleng bo holimo, tšireletso ea tikoloho le polokeho.Mokatong oa lijo-thollo oa majoe a TopJoy, TPS001-G, o tlisa maikutlo a boiketlo lapeng la hau ka sebopeho le 'mala oa lona.
Finyella ponahalo ea majoe a 'nete ka TopJoy Rigid Core Luxury Vinyl Tile E ka sebelisoa ho pholletsa le ntlo ea hau ka kichineng ea kamore ea ho hlapela kapa esita le kamoreng e ka tlaase ho etsa tharollo ea fatše e theko e tlaase le e tlaase ea tlhokomelo e tlaase. le tšehetso e kentsoeng pele e e etsa hore e be bonolo ho DIY mme e fana ka matšeliso a holimo ha o le tlas'a maoto.Etsa bonnete ba hore o qeta ho shebahala ka likotoana tse kang li-end caps stair noses reducers T-moldings le quarter round E tla mamella teko ea nako e nang le likarolo tsa bolulo ba bophelo bohle 'me e ntle bakeng sa lelapa le phathahaneng le sa batleng ho itela. e boloka bokhabane ka mafito a nang le sebopeho se nang le sebopeho se ngata le ho thella ha fatše ka majoe
Haeba u batla fatše e tšoarellang, e tšoarellang nako e telele le e sa keneleng metsi e ntlafatsang chebahalo ea sebaka sefe kapa sefe 'me e ke keng ea senya banka, romella potso HONA JOALE.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ka boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.2 limilimithara.(8 Mil.) |
| Bophara | 7.25" (184mm.) |
| Bolelele | 48" (1220mm.) |
| Qetella | Ho roala ha UV |
| Locking System |
|
| Kopo | Khoebo & Bolulo |
Lintlha tsa Tekheniki:
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND - Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND - Feta |
| Finyella | No 1907/2006 REACH | ND - Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND - Feta |
| PCP | BS EN 14041:2018 | ND - Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND - Feta |
Lintlha tsa ho paka:
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
