Ƙarshen Ƙarfafa Sauƙaƙan Shigarwa Tsarin Dutse Injin Injin Wuta na Vinyl
Bayani:
Abu:TYM 202-2
Kauri:4.0mm ~ 8.0mm
Saka Layer:0.2mm ~ 0.7mm
Ƙarƙashin ƙasa(Na zaɓi):EVA / IXPE, 1.0mm ~ 2.0mm
Girman:12" X 24"/ 12" X 12"/ Keɓancewa
Ta hanyar zaɓar shimfidar bene na vinyl na injiniya a cikin ƙirar dutse, zaku iya jin daɗin kyawawan kayan kamar slate, da fasaha da aka kama a cikin shimfidar bene na vinyl na dutse.Duk wani daki na gidanku yana da kyau, ko da ƙarƙashin cunkoson ababen hawa, babban danshi, da babban tasiri.
Injiniya Flooring Vinyl sananne ne don kasancewa mai dorewa mara misaltuwa da hana ruwa 100%.An keɓance shi da sauran nau'ikan shimfidar bene na vinyl ta hanyar babban Layer ɗin sa na musamman.An yi wannan jigon daga haɗe-haɗe na foda na ƙasa, polyvinyl chloride, da stabilizers.Wannan yana ba da tushe mai ban mamaki ga kowane katako na bene.Salon dutse na musamman, ƙirar TYM 202-2, ƙirƙirar kyan gani mai ban mamaki wanda ya dace da kowane ɗaki, har ma a ƙarƙashin babban zirga-zirga, babban danshi da babban tasiri.
Ta amfani da tsarin danna Unilin mai haƙƙin mallaka, ana iya shigar da shi da kanka kuma ya adana kuɗin aiki.Ana iya sanya su a saman nau'ikan bene na ƙasa daban-daban ko kuma shimfidar bene na yanzu.Kawai danna cikin wurin zai zama OK, kawar da buƙatar manne da rikitarwa.
| Ƙayyadaddun bayanai | |
| Surface Texture | Itace Texture |
| Gabaɗaya Kauri | 4mm ku |
| Ƙarƙashin ƙasa (Na zaɓi) | IXPE/EVA(1mm/1.5mm) |
| Saka Layer | 0.3mm ku.(12 Mil.) |
| Nisa | 12" (305mm.) |
| Tsawon | 24" (610mm) |
| Gama | Rufin UV |
| Danna |  |
| Aikace-aikace | Kasuwanci & Gidan zama |
| SPC RIGID-CORE PLANK TECHNICAL DATA | ||
| Bayanin Fasaha | Hanyar Gwaji | Sakamako |
| Girma | EN427 | Wuce |
| Kauri a duka | EN428 | Wuce |
| Kauri na lalacewa yadudduka | EN429 | Wuce |
| Girman Kwanciyar hankali | IOS 23999: 2018 & ASTM F2199-18 | Jagoran Masana'antu ≤0.02% (82oC @ 6hrs) |
| Gaba ɗaya Jagoran Kera ≤0.03% (82oC @ 6hrs) | ||
| Curling (mm) | IOS 23999: 2018 & ASTM F2199-18 | Darajar 0.16mm(82oC @ 6hrs) |
| Ƙarfin Kwasfa (N/25mm) | ASTM D903-98 (2017) | Hanyar Masana'antu 62 (Matsakaici) |
| Tsallake Hanyar Kera 63 (Matsakaici) | ||
| Load a tsaye | Saukewa: ASTM F970-17 | Ragowar Shiga:0.01mm |
| Ragowar Shiga | Saukewa: ASTM F1914-17 | Wuce |
| Resistance Scratch | ISO 1518-1: 2011 | Babu shiga cikin shafi a nauyin 20N |
| Ƙarfin Kulle (kN/m) | ISO 24334: 2014 | Jagoran Masana'antu 4.9 kN/m |
| Ko'ina Jagoran Masana'antu 3.1 kN/m | ||
| Saurin Launi zuwa Haske | ISO 4892-3: 2016 Zagayowar 1 & ISO105–A05:1993/Kor.2:2005& ASTM D2244-16 | ≥ 6 |
| Martani ga wuta | TS EN 14041: 2018 Sashe na 4.1 & EN 13501-1: 2018 | Bfl-S1 |
| ASTM E648-17A | Darasi na 1 | |
| ASTM E84-18b | Darasi A | |
| Fitowar VOC | TS EN 14041: 2018 | ND - Shiga |
| ROHS/Heavy Metal | EN 71-3:2013+A3:2018 | ND - Shiga |
| Isa | A'a 1907/2006 GASKIYA | ND - Shiga |
| Formaldehyde watsi | TS EN 14041: 2018 | Darasi: E1 |
| Gwajin Phthalate | TS EN 14041: 2018 | ND - Shiga |
| PCP | TS EN 14041: 2018 | ND - Shiga |
| Hijira na Wasu Abubuwa | EN 71 – 3:2013 | ND - Shiga |
| Bayanin tattarawa (4.0mm) | |
| PC/ctn | 12 |
| Nauyi(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Nauyi(KG)/GW | 24500 |
