Dabaqad ku habboon qoysaska casriga ah - Beelaha
Sharaxaad:
Shayga:CL1082L-24-EIR
Dhumucda:4.0mm ~ 8.0mm
Lakabka xidho:0.2mm ~ 0.7mm
Underlay (Ikhtiyaar ah):EVA/ IXPE, 1.0mm ~ 2.0mm
Cabbirka:7.25''X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Habaynta
Sagxadda isku-dhafka ah ee TopJoy waxay ka kooban tahay lakabka sare ee xirashada, lakabka filimka deco, iyo substrate isku jira oo adag.Guud ahaan waxa loo soo saaray qaab looxaan ah, iyaga oo ku dayanaya sagxadda alwaaxyada ee rakibaadda sabaynaysa.
Waa muhiim inaad haysato sagxad ka ilaalin karta dhammaan daqiiqadahaaga mashquulka badan.TopJoy sagxadda isku-dhafka ah waxay fududaynaysaa inaad dayactirto sagxadahaaga si aad waqti badan ugu raaxaysato nolosha ugu fiican halkii aad ka walwali lahayd nadiifinta.Thanks to naqshadeeda hal-abuurka leh, TopJoy sagxadda waxay leedahay dusha aan la dhammayn karin oo xannibaysa wasakhda iyo wasakhda waana 100% biyuhu.Iyadoo dabaqyo qurux badan oo qurux badan loo isticmaalo in ay ka dhigan tahay tiro badan oo dayactir ah, tignoolajiyada horumarsan ayaa siinaysa looxyada sagxadda isku-dhafka ah ee quruxda alwaaxyada dabiiciga ah iyada oo aan dhammaan buuqa.
Sidoo kale waa ubad-u-saaxiibtinimo iyo ka-hortagga simbiriirixidda.Dabaqa dhexe ee adag wuxuu sidoo kale qariyaa cilladaha sagxadaha hoose, wuxuu bixiyaa dahaarka codka aad u fiican iyo raaxada sare ee cagaha hoostiisa.
Laga soo bilaabo deegaanka ilaa meelaha ganacsiga, sagxadaha SPC waxay awoodaa inay daboosho dhammaan baahiyahaaga.
| Tilmaamid | |
| Dusha Texture | Qoryaha Qoryaha |
| Dhumucda guud | 4mm |
| Underlay (Ikhtiyaar ah) | IXPE/EVA(1mm/1.5mm) |
| Lakabka xidho | 0.2mm(8 milyan) |
| Ballaca | 7.25" (184mm.) |
| Dhererka | 48" (1220mm.) |
| dhame | Dahaarka UV |
| Nidaamka Qufulka |
|
| Codsiga | Ganacsiga & Deegaanka |
Xogta Farsamada
| SPC RIGID-CORE XOGTA TECHNICAL PLANK | ||
| Macluumaadka Farsamada | Habka Imtixaanka | Natiijooyinka |
| Cabbir | EN427 & | Gudub |
| Dhumucda guud ahaan | EN428 & | Gudub |
| Dhumucda lakabyada xidhashada | EN429 & | Gudub |
| Deganaanshaha cabbirka | IOS 23999:2018 & ASTM F2199-18 | Jihada wax soo saarka ≤0.02% (82oC @ 6saacadood) |
| Guud ahaan jihada wax-soo-saarka ≤0.03% (82oC @ 6saacadood) | ||
| Curling (mm) | IOS 23999:2018 & ASTM F2199-18 | Qiimaha 0.16mm(82oC @ 6 saacadood) |
| Xoogga diirka (N/25mm) | ASTM D903-98 (2017) | Tilmaamaha Wax-soo-saarka 62 (Celceliska) |
| Guud ahaan jihada wax-soo-saarka 63 (celcelis ahaan) | ||
| Load taagan | ASTM F970-17 | Gelida Hadhaaga:0.01mm |
| Gelitaan Hadhaaga ah | ASTM F1914-17 | Gudub |
| Iska caabinta xoqitaanka | ISO 1518-1: 2011 | Ma jiro dahaarka dhexda u saaran culeyska 20N |
| Quful Quful (kN/m) | ISO 24334:2014 | Jihada wax soo saarka 4.9 kN/m |
| Guud ahaan jihada wax-soo-saarka 3.1 kN/m | ||
| Midabka Xajmiga Iftiinka | ISO 4892-3:2016 Wareega 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥ 6 |
| Falcelinta dabka | TS EN14041: 2018 Farqada 4.1 & EN 13501-1: 2018 | Bfl-S1 |
| ASTM E648-17a | Fasalka 1 | |
| ASTM E 84-18b | Fasalka A | |
| Soosaarka VOC | BS EN 14041:2018 | ND - Gudub |
| ROHS/ Birta culus | EN 71-3:2013+A3:2018 | ND - Gudub |
| Gaadhi | Maya 1907/2006 GAAR | ND - Gudub |
| Formaldehyde sii deynta | BS EN14041:2018 | Fasalka: E 1 |
| Imtixaanka Phthalate | BS EN 14041:2018 | ND - Gudub |
| PCP | BS EN 14041:2018 | ND - Gudub |
| Socdaalka Qaybaha Qaar | EN 71 - 3:2013 | ND - Gudub |
Macluumaadka Xirmada:
| Macluumaadka Xirmada (4.0mm) | |
| Kumbuyuutar/ctn | 12 |
| Miisaanka(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Miisaanka (KG)/GW | 24500 |
