5.Authentic Industrial Concrete Look SPC Flooring
Tlhaloso:
Ntho:TYM207
Botenya:4.0mm ~ 8.0mm
Wear Layer:0.2mm ~ 0.7mm
Katlase (Ka boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:12" X 24"/ 12" X 12"/ Ho iketsetsa
Hobaneng o sa kenye mokatong ona oa rustic le o sa keneleng metsi morerong oa hau ka chebahalo ea konkreite!Mokato ona oa sejoale-joale o ratoa ke beng ba matlo le beng ba likhoebo ba banyenyane, eseng feela hobane o tšoarella, o bonolo ho o kenya le ho o hlokomela, empa hape hobane o na le chebahalo ea 'nete ea konkreite ea indasteri.
Lintlha tsa Sehlahisoa:
E entsoe ka mokhoa o khethehileng ka mokhoa oa ho notlela patent, setulo sa SPC se bonolo ho se kenya.Ka thuso ea litataiso tsa ho kenya, esita le beng ba matlo ba ka kenya ka bobona.Ha ho hlokahale koetliso e khethehileng.Lepolanka lena la vinyl le sa keneleng metsi le hohetse tlhokomelo ea DIYers ha herringbone le mekhoa ea chevron e hlaha.Beng ba likhoebo tse phathahaneng ba rata sebaka se thata bakeng sa ho se mamelle, ho hana matheba, le ho se qale.Bakeng sa tlhokomelo, sohle seo ba se hlokang ke mopopo o metsi.E na le chebahalo ea 'nete ea lehong, konkreite kapa lejoe, empa e theko e tlase ebile ha e na tlhokomelo.Lera le hatisitsoeng la vinyl ke lona le etsang hore vinyl e shebahale e batla e tšoana le thepa ea tlhaho.Ha SPC vinyl flooring e ntse e tsebahala haholo 'marakeng, ponahalo e ntseng e eketseha e etselitsoe ho etsisa ka mokhoa o hlakileng thepa ea tlhaho, joalo ka konkreite, 'mabole, joalo-joalo, e ka sebelisoa maemong a mangata' me butle-butle e fumana karolo ea 'maraka e eketsehileng. sebaka sa lehong le thata, lejoe, le lithaele.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ka boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.2 limilimithara.(8 Mil.) |
| Bophara | 12" (305mm.) |
| Bolelele | 24" (610mm.) |
| Qetella | Ho roala ha UV |
| Locking System |
|
| Kopo | Khoebo & Bolulo |
Lintlha tsa Tekheniki:
 SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
Lintlha tsa ho paka:
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
