The Newest and Fashionable Rigid Core Flooring
Tlhaloso:
Ntho:TYM501
Botenya:4.0mm ~ 8.0mm
Wear Layer:0.2mm ~ 0.7mm
Katlase (Ka boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:12" X 24"/ 12" X 12"/ Ho iketsetsa
SPC vinyl flooring e entsoe ka motsoako oa lejoe la mokoetla le resin ea vinyl, ke o mong oa mefuta e tsebahalang haholo ea fatše ka bobeli lits'ebetsong tsa bolulo le tsa khoebo.100% e sa keneleng metsi, sekoaelo sa mobu se secha sa Eco-friendly, khanyetso e phethahetseng, joalo-joalo ke likarolo tsa eona tse tloaelehileng, joalo ka mofuta o mocha ka ho fetesisa oa fatše matsatsing ana, ke tharollo e nepahetseng bakeng sa ho koahela fatše hohle.
Lintlha tsa Sehlahisoa:
E ka 'na ea e-ba potso ha motho a batla mofuta oa mokhabiso oa fatše bakeng sa jarete, haholo-holo ha u batla hore fatše ea phasejeng ea hau kapa sebaka se itseng sa jareteng ea hau se fapane, eseng feela ka tsela ea setso e bontšang.Ka ho hlaha ha fatše SPC, joale ha e sa le potso.Joalo ka mofuta o mocha oa fatše o nang le motheo o thata, ho latela sebopeho sa ona re ka tseba hore ha ho mohla u tla hloka ho tšoenyeha ka ho tšoarella ha ona, ebe ka ho hanyetsa metsi e leng tšobotsi ea mantlha e hlokoang ke jarete bophelong ba letsatsi le letsatsi, o tla ba le metsi ho lipalesa, metsi ho lifate, kahoo ho bolela hore haeba u batla ho sebelisa fatše ka jareteng ea hau, u tlameha ho fumana e 100% e hanyetsanang le metsi, SPC Flooring ke mofuta o joalo oa fatše.Hobane SPC flooring ke 100% e thibelang metsi, ho sa tsotellehe hore na u sebelisa metsi joang ka fatše, ha ho hlokahale hore u tšoenyehe, SPC flooring e ka lula hammoho le metsi.E ekelletsa ho e 'ngoe ea likarolo tsa eona e le ho hanyetsa ha eona ka matla, e le sekoaelo sa fatše jareteng ea hau kapa sebakeng se ka ntle ho ntlo ea hau, SPC flooring, e nang le lesela le matla la ho apara le lera la UV, e na le ts'ebetso e matla ea nako e telele, e u tlisetsang mathata. -mahala fatše tharollo.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ka boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.2 limilimithara.(8 Mil.) |
| Bophara | 12" (305mm.) |
| Bolelele | 24" (610mm.) |
| Qetella | Ho roala ha UV |
| Locking System |
|
| Kopo | Khoebo & Bolulo |
Lintlha tsa Tekheniki:
 SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
Lintlha tsa ho paka:
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
