Mohaho oa Carpet Paterone ea Vinyl bakeng sa Kamore ea Bana le Kindergarten
Tlhaloso:
Ntho:984-12
Botenya:4.0mm ~ 8.0mm
Apara Layer:0.2mm ~ 0.7mm
Katlase (Taba ea boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:12" X 24"/ 12" X 12"/ Ho iketsetsa
Ka mebala e metle le sebopeho se setle, tile ea rona ea 984-12 carpet vinyl e loketse ho kenngoa ka kamoreng ea bana, joalo ka li-kindergartens, litsi tsa bana le sebaka sa ho bapala sa bana.'Mala oa tile ena o na le bokhoni bo phahameng ba ho hanyetsa matheba.
Tšobotsi e mpe haholo ea lik'hapete ke hore li na le tloaelo ea ho ikatisa libaktheria.Ho phaella moo, hamorao ho hloekisa le ho hlokomela k’hapete ho ile ha bitsa chelete e ngata.
Ka hona, TopJoy e entse letoto la lithaele tsa vinyl tse nang le mekhoa ea lik'hapete, tse ka fang bareki sebaka se bonolo sa ho hloekisa fatše, hape le tharollo e ka tšeptjoang ea fatše.Lithaele tsa rona tsa k'hapete tsa 984 SPC li tumme bakeng sa ho kenya likamoreng tsa bana.E le lebaka la mebala ea tsona e khanyang le e mebala-bala.Bana ba ka bapala ho eona ba sa roala lieta kapa esita le ho hloa holim’a eona, ba sa tšoenyehe ka likokoana-hloko tse ngata, ha ba bapisoa le lik’hapete.The bevel of TopJoy flooring ke micro-gap, 'me mapolanka a mang le a mang a mabeli a khomaretsoe ka thata.Kahoo, ha e kenelle metsi ka 100%, ho bolelang hore batsoali ba ka hloekisa pele bana ba bapala ho eona.Ho seng joalo, fatše TopJoy ke ho hanyetsa letheba le khanyetso, e le hore topJoy carpet vinyl flooring e fa bana sebaka se setle sa ho bapala.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ha ho boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.3 limilimithara.(12 Mil.) |
| Bophara | 12" (305mm.) |
| Bolelele | 24" (610mm.) |
| Qetella | Ho roala ha UV |
| Tobetsa |  |
| Kopo | Khoebo & Bolulo |
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
