I-Carpet Pattern Vinyl flooring yegumbi lezingane kanye ne-Kindergarten
Incazelo:
Into:984-12
Ubukhulu:4.0mm ~ 8.0mm
Gqoka Isendlalelo:0.2mm ~ 0.7mm
I-Underlay(Ongakukhetha):EVA/IXPE, 1.0mm~2.0mm
Usayizi:12” X 24”/ 12” X 12”/ Ukwenza ngokwezifiso
Ngemibala emihle nokuthungwa okuhle, i-984-12 carpet vinyl tile yethu ifaneleka ukufakwa egunjini lezingane, njengeenkulisa, izikhungo zezingane, nendawo yokudlala yezingane.Umbala waleli tile unamandla amakhulu okumelana namabala.
Isici esibi kakhulu sikakhaphethi ukuthi bathambekele ekuzaleni amagciwane.Ngaphezu kwalokho, kamuva ukuhlanza nokunakekela umata kwabiza imali eningi.
Ngakho-ke, i-TopJoy iklame uchungechunge lwamathayili e-vinyl ngamaphethini okhaphethi, anganikeza abathengi indawo ephansi yokuhlanza kalula, kanye nesisombululo esithembekile saphansi.Iphethini yethu kakhaphethi amathayela angu-984 SPC adumile ukufakwa emakamelweni ezingane.Njengoba isizathu semibala yazo igqamile futhi inemibala.Izingane zingadlala kuyo zingafake zicathulo noma zigibele kuyo, ngaphandle kokukhathazeka ngamagciwane amaningi, uma kuqhathaniswa nokhaphethi.I-bevel ye-TopJoy flooring iyi-micro-gap, futhi wonke amapulangwe amabili anamathiselwe ngokuqinile.Ngakho-ke, ayingeni manzi ngo-100%, okusho ukuthi abazali bangakwazi ukuyihlanza ngaphambi kokuba izingane zidlale kuyo.Uma kungenjalo, i-TopJoy flooring ukumelana namabala nokumelana nokuklwejwa, ukuze i-TopJoy carpet vinyl flooring inikeze izingane indawo enhle yokudlala.
| Ukucaciswa | |
| Ukwakheka Kobuso | Ukwakheka Kwezinkuni |
| Ubukhulu Sebonke | 4mm |
| I-underlay(Uma uthanda) | I-IXPE/EVA(1mm/1.5mm) |
| Gqoka Isendlalelo | 0.3mm.(12 Mil.) |
| Ububanzi | 12” (305mm.) |
| Ubude | 24” (610mm.) |
| Qeda | I-UV Coating |
| Chofoza |  |
| Isicelo | Ezohwebo Nezindawo Zokuhlala |
| IDATHA YOBUCHWEPHESHE YE-SPC RIGID-CORE PLANK | ||
| Ulwazi Lobuchwepheshe | Indlela Yokuhlola | Imiphumela |
| I-Dimensional | I-EN427 & | Dlula |
| Ubukhulu ngokuphelele | I-EN428 & | Dlula |
| Ubukhulu bezendlalelo zokugqoka | I-EN429 & | Dlula |
| Ukuzinza kweDimensional | I-IOS 23999:2018 ne-ASTM F2199-18 | Izikhombisi-ndlela Zokukhiqiza ≤0.02% (82oC @ 6hrs) |
| Kuzo zonke izikhombisi-ndlela zokukhiqiza ≤0.03% (82oC @ 6hrs) | ||
| Ukugoqa (mm) | I-IOS 23999:2018 ne-ASTM F2199-18 | Ivelu 0.16mm(82oC @ 6hrs) |
| Amandla Ekhasi (N/25mm) | I-ASTM D903-98(2017) | I-Manufacturing Direction 62 (Isilinganiso) |
| I-Direct Manufacture Direction 63 (Isilinganiso) | ||
| I-Static Load | I-ASTM F970-17 | Ukuhlehliswa Okusele:0.01mm |
| Ukuhlehliswa Kwezinsalela | I-ASTM F1914-17 | Dlula |
| I-Scratch Resistance | ISO 1518-1:2011 | Akukho kungene i-coating ekulayisheni okungu-20N |
| Amandla Okukhiya(kN/m) | ISO 24334:2014 | Isikhombisi-ndlela Sokukhiqiza 4.9 kN/m |
| Kuzo zonke izikhombisi-ndlela Zokukhiqiza 3.1 kN/m | ||
| Ukushesha Kombala Ekukhanyeni | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005&ASTM D2244-16 | ≥ 6 |
| Ukusabela emlilweni | I-BS EN14041:2018 Isigaba somthetho 4.1 & EN 13501-1:2018 | I-Bfl-S1 |
| I-ASTM E648-17a | Ikilasi 1 | |
| I-ASTM E 84-18b | Ikilasi A | |
| Ukukhishwa kwe-VOC | I-BS EN 14041:2018 | ND - Dlula |
| I-ROHS/Insimbi Enzima | EN 71-3:2013+A3:2018 | ND - Dlula |
| Finyelela | No 1907/2006 REACH | ND - Dlula |
| Ukukhishwa kwe-formaldehyde | I-BS EN14041:2018 | Ikilasi: E1 |
| Ukuhlolwa kwe-Phthalate | I-BS EN 14041:2018 | ND - Dlula |
| I-PCP | I-BS EN 14041:2018 | ND - Dlula |
| Ukufuduka Kwezinto Ezithize | EN 71 – 3:2013 | ND - Dlula |
| Ulwazi Lokupakisha(4.0mm) | |
| Ama-PC/ctn | 12 |
| Isisindo(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Isisindo(KG)/GW | 24500 |
