I-Carpet-plus Luxury Vinyl Tile ene-Rigid Core
Incazelo:
Into:984-03s
Ubukhulu:4.0mm ~ 8.0mm
Gqoka Isendlalelo:0.2mm ~ 0.7mm
I-Underlay(Ongakukhetha):EVA/IXPE, 1.0mm~2.0mm
Usayizi:12” X 24”/ 12” X 12”/ Ukwenza ngokwezifiso
I-SPC Luxury Vinyl floor Carpet-plus iqoqo elisha elidalwe ngu-Tapjoy.Ihlangabezana nezidingo zobuhle zabathandi bokhaphethi bendabuko kuyilapho iqeda izinkinga ngenkathi ilungisa ngenxa yomgogodla wayo oqinile we-SPC ongangeni manzi nokumelana namabala.Imodeli engu-984-03S ifaka ukuthungwa okulukiwe ngemigqa empunga yomlotha kanye nonxande abampunga okumnyama banikeza umuzwa ofudumele ezindlini noma emahhovisi.
Njengohlobo lwe-flooring lwakudala, ukhaphethi ukhanga kakhulu kubantu abathanda umhlobiso waphansi wezinyawo onemibala futhi othambile.Kodwa uma kuziwa ekunakekeleni kwansuku zonke, kungase kube iphupho elibi.Igcina umswakama kanye namabala kalula.Isikhathi esiningi, kufanele kusulwe ngamakhemikhali athile angaba yingozi empilweni.Kwa-TopJoy, iqoqo lethu elisha le-Carpet-plus SPC rigid core vinyl flooring linombala ofanayo wokhaphethi nokuthungwa kodwa elisebenza kahle kakhulu elivikela amanzi kanye nokumelana namabala.
Kulula ukuyifaka ngohlelo lwayo lokukhiya ngokuchofoza kanye nethegi yentengo emaphakathi yenza ikhaya elimaphakathi elinesabelomali esilinganiselwe likwazi ukuthengeka.
Ngokufakwa ngaphansi kwekhwalithi enhle, i-Carpet-plus SPC rigid core vinyl flooring nayo ikhululekile ngaphansi kwezinyawo nokuncishiswa kwe-acoustic.I-eco-friendly kunephansi likakhaphethi elivamile njengoba impahla ingaphinda isetshenziswe ngo-100%.
| Ukucaciswa | |
| Ukwakheka Kobuso | Ukwakheka Kwezinkuni |
| Ubukhulu Sebonke | 4mm |
| I-underlay(Uma uthanda) | I-IXPE/EVA(1mm/1.5mm) |
| Gqoka Isendlalelo | 0.3mm.(12 Mil.) |
| Ububanzi | 12” (305mm.) |
| Ubude | 24” (610mm.) |
| Qeda | I-UV Coating |
| Chofoza |  |
| Isicelo | Ezohwebo Nezindawo Zokuhlala |
| IDATHA YOBUCHWEPHESHE YE-SPC RIGID-CORE PLANK | ||
| Ulwazi Lobuchwepheshe | Indlela Yokuhlola | Imiphumela |
| I-Dimensional | I-EN427 & | Dlula |
| Ubukhulu ngokuphelele | I-EN428 & | Dlula |
| Ubukhulu bezendlalelo zokugqoka | I-EN429 & | Dlula |
| Ukuzinza kweDimensional | I-IOS 23999:2018 ne-ASTM F2199-18 | Izikhombisi-ndlela Zokukhiqiza ≤0.02% (82oC @ 6hrs) |
| Kuzo zonke izikhombisi-ndlela zokukhiqiza ≤0.03% (82oC @ 6hrs) | ||
| Ukugoqa (mm) | I-IOS 23999:2018 ne-ASTM F2199-18 | Ivelu 0.16mm(82oC @ 6hrs) |
| Amandla Ekhasi (N/25mm) | I-ASTM D903-98(2017) | I-Manufacturing Direction 62 (Isilinganiso) |
| I-Direct Manufacture Direction 63 (Isilinganiso) | ||
| I-Static Load | I-ASTM F970-17 | Ukuhlehliswa Okusele:0.01mm |
| Ukuhlehliswa Kwezinsalela | I-ASTM F1914-17 | Dlula |
| I-Scratch Resistance | ISO 1518-1:2011 | Akukho kungene i-coating ekulayisheni okungu-20N |
| Amandla Okukhiya(kN/m) | ISO 24334:2014 | Isikhombisi-ndlela Sokukhiqiza 4.9 kN/m |
| Kuzo zonke izikhombisi-ndlela Zokukhiqiza 3.1 kN/m | ||
| Ukushesha Kombala Ekukhanyeni | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005&ASTM D2244-16 | ≥ 6 |
| Ukusabela emlilweni | I-BS EN14041:2018 Isigaba somthetho 4.1 & EN 13501-1:2018 | I-Bfl-S1 |
| I-ASTM E648-17a | Ikilasi 1 | |
| I-ASTM E 84-18b | Ikilasi A | |
| Ukukhishwa kwe-VOC | I-BS EN 14041:2018 | ND - Dlula |
| I-ROHS/Insimbi Enzima | EN 71-3:2013+A3:2018 | ND - Dlula |
| Finyelela | No 1907/2006 REACH | ND - Dlula |
| Ukukhishwa kwe-formaldehyde | I-BS EN14041:2018 | Ikilasi: E1 |
| Ukuhlolwa kwe-Phthalate | I-BS EN 14041:2018 | ND - Dlula |
| I-PCP | I-BS EN 14041:2018 | ND - Dlula |
| Ukufuduka Kwezinto Ezithize | EN 71 – 3:2013 | ND - Dlula |
| Ulwazi Lokupakisha(4.0mm) | |
| Ama-PC/ctn | 12 |
| Isisindo(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Isisindo(KG)/GW | 24500 |
