I-Plastic Core Artificial Click Stone Texture Vinyl Plank SPC Flooring
Incazelo:
Ingxenye #:TPS001-G
Ubukhulu:4.0mm ~ 8.0mm
Isendlalelo sokugqoka:0.2mm ~ 0.7mm
I-underlay (Ongakukhetha):EVA/IXPE, 1.0mm~2.0mm
Usayizi:12” X 24”/ 18” X 18”/ 24” X 24”, Ukwenza ngokwezifiso
Yenziwe ngekhwalithi ephezulu, ukuvikelwa kwemvelo nokuphepha.Isitezi sokusanhlamvu setshe le-TopJoy, i-TPS001-G, iletha umuzwa onethezeke kakhudlwana ekhaya lakho ngokuthungwa nombala walo wemvelo.
Zuza ukubukeka kwetshe okuyiqiniso okungenamthungo nge-TopJoy Rigid Core Luxury Vinyl Tile Ingasetshenziswa kulo lonke ikhaya lakho ekhishini lokuhlala endaweni yokugezela noma ngisho nangaphansi ukuze udale isisombululo se-flooring esithengekayo nesiphansi Le flooring kulula ukuyifaka ngesistimu yokukhiya. kanye nokwesekwa okunamathiselwe ngaphambilini kuyenza i-DIY-friendly futhi kunikeza ukunethezeka okuphezulu uma ingaphansi kwezinyawo.Qiniseka ukuthi uqedela ukubukeka ngezicucu zokunquma njengama-end caps stair noses reducers T-moldings kanye nekota round Izomelana nokuhlolwa kwesikhathi ngezici zendawo yokuhlala impilo yonke futhi ilungele umndeni omatasa ongafuni ukudela isitayela It igcina ubuhle obunamafindo anothile ngomlingiswa kanye nokusanhlamvu kwesisekelo samatshe sangempela
Uma ufuna indawo eqinile, ehlala isikhathi eside futhi engenamanzi ethuthukisa ukubukeka kwanoma iyiphi indawo futhi engeke iphule ibhange, thumela umbuzo MANJE.
| Ukucaciswa | |
| Ukwakheka Kobuso | Ukwakheka Kwezinkuni |
| Ubukhulu Sebonke | 4mm |
| I-underlay (Ongakukhetha) | I-IXPE/EVA(1mm/1.5mm) |
| Gqoka Isendlalelo | 0.2mm.(8 Mil.) |
| Ububanzi | 7.25" (184mm.) |
| Ubude | 48" (1220mm.) |
| Qeda | I-UV Coating |
| Uhlelo lokukhiya |
|
| Isicelo | Ezohwebo Nezindawo Zokuhlala |
Idatha Yezobuchwepheshe:
| IDATHA YOBUCHWEPHESHE YE-SPC RIGID-CORE PLANK | ||
| Ulwazi Lobuchwepheshe | Indlela Yokuhlola | Imiphumela |
| I-Dimensional | I-EN427 & | Dlula |
| Ubukhulu ngokuphelele | I-EN428 & | Dlula |
| Ubukhulu bezendlalelo zokugqoka | I-EN429 & | Dlula |
| Ukuzinza kweDimensional | I-IOS 23999:2018 ne-ASTM F2199-18 | Izikhombisi-ndlela Zokukhiqiza ≤0.02% (82oC @ 6hrs) |
| Kuzo zonke izikhombisi-ndlela zokukhiqiza ≤0.03% (82oC @ 6hrs) | ||
| Ukugoqa (mm) | I-IOS 23999:2018 ne-ASTM F2199-18 | Ivelu 0.16mm(82oC @ 6hrs) |
| Amandla Ekhasi (N/25mm) | I-ASTM D903-98(2017) | I-Manufacturing Direction 62 (Isilinganiso) |
| I-Direct Manufacture Direction 63 (Isilinganiso) | ||
| I-Static Load | I-ASTM F970-17 | Ukuhlehliswa Okusele:0.01mm |
| Ukuhlehliswa Kwezinsalela | I-ASTM F1914-17 | Dlula |
| I-Scratch Resistance | ISO 1518-1:2011 | Akukho kungene i-coating ekulayisheni okungu-20N |
| Amandla Okukhiya(kN/m) | ISO 24334:2014 | Isikhombisi-ndlela Sokukhiqiza 4.9 kN/m |
| Kuzo zonke izikhombisi-ndlela Zokukhiqiza 3.1 kN/m | ||
| Ukushesha Kombala Ekukhanyeni | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005&ASTM D2244-16 | ≥ 6 |
| Ukusabela emlilweni | I-BS EN14041:2018 Isigaba somthetho 4.1 & EN 13501-1:2018 | I-Bfl-S1 |
| I-ASTM E648-17a | Ikilasi 1 | |
| I-ASTM E 84-18b | Ikilasi A | |
| Ukukhishwa kwe-VOC | I-BS EN 14041:2018 | ND - Dlula |
| I-ROHS/Insimbi Enzima | EN 71-3:2013+A3:2018 | ND - Dlula |
| Finyelela | No 1907/2006 REACH | ND - Dlula |
| Ukukhishwa kwe-formaldehyde | I-BS EN14041:2018 | Ikilasi: E1 |
| Ukuhlolwa kwe-Phthalate | I-BS EN 14041:2018 | ND - Dlula |
| I-PCP | I-BS EN 14041:2018 | ND - Dlula |
| Ukufuduka Kwezinto Ezithize | EN 71 – 3:2013 | ND - Dlula |
Ukupakisha Ulwazi:
| Ulwazi Lokupakisha(4.0mm) | |
| Ama-PC/ctn | 12 |
| Isisindo(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Isisindo(KG)/GW | 24500 |
