Tšusumetso ea 'mabole SPC Hybrid Tile
Tlhaloso:
Setšoantšo: TPS001-E
Botenya:4.0mm ~ 8.0mm
Wear Layer:0.2mm ~ 0.7mm
Katlase (Ka boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:12" X 24"/ 18" X 18"/ 24" X 24", Ho itloaetsa
Stone Polymer Composite (SPC) ke setsi se tšoarellang nako e telele, se phahameng se teteaneng se entsoeng ka lejoe la mokoetla la tlhaho.Ka tlhaloso e phahameng ea lera la vinyl e khabisitsoeng, mohlala oa eona le mekhoa ea eona e ka etsisa lejoe la tlhaho kapa marble.Mohlala ona oa KBM101-8 ke motsoako oa theknoloji ea morao-rao ea fatše ea SPC e nang le aesthetics ea phello ea 'mabole ea tlhaho.
Phello ea Marble SPC Hybrid Tileke sehlahisoa se secha sa fatše se kopanyang likarolo tsa tlhaho le theknoloji ea sejoale-joale ea vinyl flooring.mohopolo oa moralo oa ts'ireletso ea tikoloho e tala le ho khutlela tlhahong o etselitsoe ho leka-lekanya le ho ntlafatsa kamano ea ka hare pakeng tsa rona le lefats'e la tlhaho ka kutloisiso le psychology, ho phehella bophelo bo botle, le ho hlahisa tšebelisano ka moralo oa pono, o ka fokotsang khatello, ho imolla. mokhathala oa kelello, ho ntlafatsa maikutlo le ho ntlafatsa index ea bophelo bo botle.Lipaterone tsa majoe tse bolokiloeng, lithothokiso tse kang penta ea tlhaho ea enke ea splash.Mela e sa tloaelehang, ho na le mofuta oa botle bo sa tloaelehang, le hoja ho bata, empa hape u se ke ua ikutloa u bora.E boetse e bontša moea oa tlhaho le o hlakileng oa bonono.Lejoe le shebahala le thata la vinyl flooring ke tlhokomelo e bonolo, e sa keneleng metsi le antiskid, ho hanyetsa ho roala le ho hanyetsa matheba ho bonahala ka ho feletseng lireschorenteng tsa hotele.Papali e ntle e u joetsa hore u qale letsatsi le lecha mona.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ka boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.2 limilimithara.(8 Mil.) |
| Bophara | 7.25" (184mm.) |
| Bolelele | 48" (1220mm.) |
| Qetella | Ho roala ha UV |
| Locking System |
|
| Kopo | Khoebo & Bolulo |
Lintlha tsa Tekheniki:
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND - Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND - Feta |
| Finyella | No 1907/2006 REACH | ND - Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND - Feta |
| PCP | BS EN 14041:2018 | ND - Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND - Feta |
Lintlha tsa ho paka:
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
